Volkswagen Golf MK7.5 (2020-Present) interior lights stay on what could be wrong

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

547 words

Problem Statement

Learn how to diagnose and fix interior lights that stay on in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shorts or shocks.

Symptoms

•Interior lights do not turn off after closing doors
•Dome light remains on while driving
•Battery may drain when the vehicle is parked
•Possible warning messages on the dashboard
•Malfunctioning door switches

Diagnostic Steps

1
Inspect all doors to ensure they are completely closed and not ajar.
2
Check the door switch functionality by manually pressing each switch and observing the interior lights.
3
Use an OBD-II scanner to check for any stored trouble codes related to lighting or door sensors.
4
Inspect the vehicle’s interior light control switch for proper operation.
5
Examine the wiring and connections to the door switches for any signs of damage or corrosion.
6
Test the battery voltage to ensure it is within normal operating range.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Trim removal tool
•Wire strippers
•Electrical connectors
•Replacement door switch
•Replacement interior light control switch

Parts Required

•Door switch (if faulty)
•Interior light control switch (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect all doors to ensure they are completely closed and not ajar.
2
Check the door switch functionality by manually pressing each switch and observing the interior lights.
3
Use an OBD-II scanner to check for any stored trouble codes related to lighting or door sensors.
4
Inspect the vehicle’s interior light control switch for proper operation.
5
Examine the wiring and connections to the door switches for any signs of damage or corrosion.
6
Test the battery voltage to ensure it is within normal operating range.

Solution

1. Preparation

Gather the necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the ignition is off.
Disconnect the negative battery terminal for safety.

2. Inspect and Test Door Switches

Sub-steps:
1. Locate the door switch on each door frame.
2. Use a multimeter to test continuity across each switch when pressed.
3. Replace any faulty switches with new ones (part number: specific to the vehicle model).
Tools Required: Multimeter, replacement door switch.

3. Check Interior Light Control Switch

Sub-steps:
1. Remove the interior light assembly using a trim removal tool.
2. Disconnect the wiring harness from the light assembly.
3. Test the control switch for continuity and operation.
4. Replace the interior light control switch if defective.
Tools Required: Trim removal tool, multimeter, replacement switch.

4. Inspect Wiring and Connections

Sub-steps:
1. Examine the wiring harness leading to the door switches and interior lights for any signs of fraying or breaks.
2. Repair any damaged wires using appropriate connectors and electrical tape.
3. Ensure all connectors are securely fastened and free of corrosion.
Tools Required: Wire strippers, electrical connectors, electrical tape.

5. Reconnect Battery and Test

Sub-steps:
1. Reconnect the negative battery terminal.
2. Turn on the vehicle and test the interior lights by opening and closing the doors.
3. Ensure the lights turn off as expected after closing the doors.
Tools Required: None, just a wrench for the battery terminal.