FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Volkswagen Golf Seventh Generation (2013-2020) AC not blowing cold air what could be wrong - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7.5 (2020-Present)/Volkswagen Golf Seventh Generation (2013-2020) AC not blowing cold air what could be wrong

Volkswagen Golf Seventh Generation (2013-2020) AC not blowing cold air what could be wrong

Volkswagen Golf MK7.5 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
486 words

Problem Statement

Learn how to diagnose and fix AC not blowing cold air in Volkswagen Golf (2013-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always wear safety goggles and gloves when handling refrigerants.
  • •Ensure the vehicle is in a well-ventilated area when working on the AC system.

Symptoms

  • •AC compressor not engaging
  • •Warm air blowing from vents
  • •Unusual noises from the AC system
  • •Dashboard AC control lights not functioning
  • •Refrigerant leaks under the vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Refrigerant gauge set
  • •Socket set
  • •Screwdrivers

Parts Required

  • •Refrigerant (R-134a or as specified)
  • •AC compressor (if faulty)
  • •Expansion valve or receiver-dryer (if needed)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Disconnect the negative battery terminal to prevent electrical shorts.

Tools Required:

  • OBD-II scanner
  • Multimeter
  • Refrigerant gauge set
  • Socket set
  • Screwdrivers
2. Recharge Refrigerant
  1. Connect Refrigerant Gauge
    • Attach the high and low-pressure gauges to the AC service ports.
  2. Check Refrigerant Levels
    • Assess the pressure readings against manufacturer specifications (typically between 25-40 psi for low side).
  3. Add Refrigerant
    • If levels are low, connect the refrigerant canister and add refrigerant as needed, following can instructions and maintaining proper pressure.
3. Inspect and Replace AC Components (if necessary)
  1. Inspect AC Compressor Clutch
    • If the clutch does not engage, test the electrical connection and replace if faulty.
  2. Examine AC Condenser
    • Check for blockages or damages; clean or replace as needed.
  3. Replace Expansion Valve or Receiver-Dryer
    • If the system is still not working after a recharge, replace these components as they can cause blockages.
4. Recheck System Functionality
  • After repairs, reconnect the battery and test the AC system for proper operation.