why does my Volkswagen Golf MK7.5 remote start not work?

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

584 words

Problem Statement

Learn how to diagnose and fix remote start issues in Volkswagen Golf MK7.5. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent short circuits.
•Allow the vehicle to cool before inspecting the engine compartment.

Symptoms

•Remote start button on the key fob is unresponsive
•Engine does not start when remote start is attempted
•Vehicle locks/unlocks normally with the key fob
•Dashboard lights may illuminate momentarily when attempting to remote start
•No sound or indication of engine attempt to start

Diagnostic Steps

1
Check the key fob battery to ensure it has sufficient charge.
2
Verify that the vehicle is in a suitable environment for remote start (e.g., doors closed, hood closed, etc.).
3
Use an OBD-II scanner to check for any error codes related to the engine or immobilizer system.
4
Inspect the vehicle's battery voltage to ensure it is above the minimum threshold required for remote start.
5
Confirm that the remote start feature is enabled in the vehicle settings or through the manufacturer’s app.
6
Test the functionality of the remote start system using a different key fob, if available.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small screwdriver
•Multimeter
•Socket set

Parts Required

•Key fob battery (CR2032)
•Vehicle battery (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the key fob battery to ensure it has sufficient charge.
2
Verify that the vehicle is in a suitable environment for remote start (e.g., doors closed, hood closed, etc.).
3
Use an OBD-II scanner to check for any error codes related to the engine or immobilizer system.
4
Inspect the vehicle's battery voltage to ensure it is above the minimum threshold required for remote start.
5
Confirm that the remote start feature is enabled in the vehicle settings or through the manufacturer’s app.
6
Test the functionality of the remote start system using a different key fob, if available.

Solution

1. Preparation

Gather necessary tools and components.
Ensure that the vehicle is parked in a safe location and the engine is off.
Disconnect the negative terminal of the battery.

2. Key Fob Battery Replacement

Tools Required: Small screwdriver, new key fob battery (typically CR2032).
Open the key fob using a small screwdriver to gently pry apart the halves.
Remove the old battery and replace it with a new one, ensuring proper polarity.
Reassemble the key fob and test the remote start function.

3. Inspect Vehicle Battery

Tools Required: Multimeter.
Use a multimeter to check the voltage of the vehicle battery. It should read at least 12.6 volts for proper remote start functionality.
If the voltage is low, charge or replace the vehicle battery as needed.

4. Check Remote Start Settings

Reconnect the negative terminal of the battery.
Turn on the vehicle's ignition and navigate to the settings on the dashboard display.
Ensure that the remote start feature is enabled. Adjust settings if necessary.

5. Inspect Wiring and Connections

Tools Required: Socket set, multimeter.
Check the wiring harness and connections related to the remote start system for any signs of damage or corrosion.
Repair or replace any damaged wiring or connectors.

6. Re-test Remote Start

After completing the above steps, attempt to use the remote start feature again.
Ensure all doors and the hood are closed to allow the system to function.