FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why is my Volkswagen Golf MK7.5 (2020-Present) AC blowing hot air - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7.5 (2020-Present)/why is my Volkswagen Golf MK7.5 (2020-Present) AC blowing hot air

why is my Volkswagen Golf MK7.5 (2020-Present) AC blowing hot air

Volkswagen Golf MK7.5 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
515 words

Problem Statement

Complete guide to fixing AC that blows hot air in Volkswagen Golf MK7.5. Includes symptoms, diagnostic steps, tools required, and repair procedures.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working on it to prevent burns.

Symptoms

  • •AC system not cooling cabin air
  • •Warm air from AC vents
  • •Increased engine temperature
  • •Strange noises from the AC compressor
  • •AC compressor clutch not engaging

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Refrigerant gauge
  • •OBD-II scanner
  • •Basic socket set
  • •Screwdrivers (flathead and Phillips)
  • •Torque wrench

Parts Required

  • •AC refrigerant
  • •AC fuse (if blown)
  • •Cabin air filter (if dirty)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required.
  • Ensure the vehicle is parked on a level surface with the engine off.
  • Disconnect the battery to prevent any electrical shorts.
2. Check Refrigerant Level
  • Connect a refrigerant gauge to the low-pressure service port of the AC system.
  • If the level is low, it may indicate a leak. Add refrigerant according to specifications in the owner's manual.
3. Inspect and Replace the AC Fuse
  • Locate the fuse box, typically found under the dashboard or in the engine compartment.
  • Remove the AC fuse and inspect it for continuity.
  • If blown, replace it with a fuse of the same amperage.
4. Examine the AC Compressor
  • Reconnect the battery and turn on the AC to check if the compressor clutch engages.
  • If it does not engage, inspect the wiring and connectors for any damage.
  • If the compressor is defective, replace it by removing the serpentine belt and unbolting the compressor from the engine.
5. Replace the Cabin Air Filter
  • Locate the cabin air filter access panel, usually behind the glove box or under the dashboard.
  • Remove the old filter and replace it with a new one, ensuring proper orientation.
6. Final Reassembly
  • Reconnect all components removed during the repair.
  • Ensure all tools are accounted for and that no wiring is pinched or damaged.