why is my Volkswagen Golf MK7.5 (2020-Present) making a grinding noise when braking

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

511 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise when braking in Volkswagen Golf MK7.5. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool down before starting any repairs.

Symptoms

•Grinding noise when applying brakes
•Reduced braking performance
•Vibration in the brake pedal
•Brake warning light illuminated
•Uneven wear on brake pads or rotors

Diagnostic Steps

1
Inspect brake pads for wear and thickness using a caliper gauge.
2
Examine brake rotors for scoring or damage visually.
3
Check for debris or foreign objects lodged between the brake components.
4
Inspect the brake calipers for proper operation and any signs of leakage.
5
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and thickness using a caliper gauge.
2
Examine brake rotors for scoring or damage visually.
3
Check for debris or foreign objects lodged between the brake components.
4
Inspect the brake calipers for proper operation and any signs of leakage.
5
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is off.
Disconnect the battery to prevent any electrical issues.

2. Wheel Removal

Using a lug wrench, loosen the lug nuts on the wheel.
Raise the vehicle using a jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheel to access the braking components.

3. Brake Pad and Rotor Inspection

Remove the caliper bolts using a socket set and slide the caliper off the rotor.
Inspect the brake pads for wear; if thinner than 3mm, replace them.
Check the brake rotor for scoring or warping; if damaged, replace the rotor.
Clean the rotor surface with brake cleaner if it is still in good condition.

4. Replacement of Components

If brake pads are worn, remove the old pads and install new ones, ensuring they are properly seated.
If the rotor is damaged, replace it by removing the retaining screws and installing the new rotor, tightening it to the manufacturer’s torque specifications.
Reattach the caliper onto the rotor and secure it with the caliper bolts, tightening to the specified torque value.

5. Reassembly

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle from the jack stands and tighten the lug nuts in a crisscross pattern to the specified torque.
Reconnect the battery.