how to reset the oil light in Volkswagen Golf MK6 (2009-2014)

Volkswagen Golf MK8 (2019-2024)

10-15 minutes

Time

easy

Difficulty

medium

Severity

2 min read

376 words

Problem Statement

Learn how to reset the oil light in your Volkswagen Golf MK6 (2009-2014) after an oil change. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

10-15 minutes

Important safety information - read before proceeding

1
Ensure the vehicle is parked on a level surface and the ignition is off.
2
Turn the ignition to the 'On' position without starting the engine.
3
Press the accelerator pedal fully three times within 10 seconds.
4
Turn the ignition off and then on again to check if the oil light is reset.
5
If the oil light remains on, repeat the process or check the vehicle for additional issues.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is off.
2
Turn the ignition to the 'On' position without starting the engine.
3
Press the accelerator pedal fully three times within 10 seconds.
4
Turn the ignition off and then on again to check if the oil light is reset.
5
If the oil light remains on, repeat the process or check the vehicle for additional issues.

Solution

1. Preparation

2. Resetting the Oil Light

Turn Ignition On
- Insert the key into the ignition and turn it to the "On" position without starting the engine.
Accelerate Pedal Press
- Fully press the accelerator pedal three times within 10 seconds. Make sure to press it all the way down for each press for the reset to register.
Turn Ignition Off
- After the third press, turn the ignition off completely.
Verify Reset
- Turn the ignition back to the "On" position and check if the oil light is still illuminated. If it is off, the reset was successful.