FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Golf MK6 (2009-2014) has no power to the fuel pump, what should I check - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK8 (2019-2024)/my Volkswagen Golf MK6 (2009-2014) has no power to the fuel pump, what should I check

my Volkswagen Golf MK6 (2009-2014) has no power to the fuel pump, what should I check

Volkswagen Golf MK8 (2019-2024)

Error Codes
1-2 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
561 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix fuel pump power issues in Volkswagen Golf MK6 (2009-2014). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Allow the vehicle to cool down before performing any maintenance

Symptoms

  • •Engine cranks but fails to start
  • •No sound from the fuel pump when the ignition is turned on
  • •Check engine light may be illuminated
  • •Fuel gauge may not function properly
  • •Possible stalling during operation

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Electrical tape

Parts Required

  • •Fuel pump relay
  • •Fuel pump fuse

Additional Information

Affected Component
Fuel System
Estimated Time
1-2 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather the necessary tools and parts.
  • Disconnect the battery negative terminal to ensure safety.
  • Lift the vehicle if necessary, using jack stands.
2. Check and Replace the Fuel Pump Relay
  • Locate the fuel pump relay in the fuse box (refer to the owner's manual for the exact location).
  • Remove the relay and inspect for any signs of damage.
  • Test the relay with a multimeter for continuity. If faulty, replace with a new relay.
3. Inspect and Replace the Fuel Pump Fuse
  • Locate the fuse for the fuel pump in the fuse box.
  • Remove the fuse and visually inspect it for any breaks or burn marks.
  • Replace with a new fuse of the same amperage rating if necessary.
4. Test and Repair Wiring
  • Inspect the wiring harness leading to the fuel pump for any frays or damage.
  • If damaged, repair the wiring using appropriate connectors and electrical tape.
  • Ensure all connectors are clean and secure.
5. Connect and Test the Fuel Pump
  • Reconnect the fuel pump connector.
  • Reconnect the battery negative terminal.
  • Turn the ignition key to the "ON" position and listen for the fuel pump to activate.
6. Final Assembly
  • If all checks are successful and the fuel pump operates, lower the vehicle if it was raised.
  • Ensure all components are secured and replaced covers or panels.