how to replace the windshield wipers on my Volkswagen Golf MK7 (2015-2019)

Volkswagen Golf MK8.5 (2024-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

444 words

Problem Statement

Learn how to replace windshield wipers on your Volkswagen Golf MK7 (2015-2019). Step-by-step guide with symptoms, diagnostic steps, and safety tips.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the engine is off and the wiper switch is in the off position before performing the replacement.

Symptoms

•Streaks or smears on the windshield during use
•Wipers skipping or chattering across the surface
•Wipers not making full contact with the windshield
•Visible wear or damage to the rubber blades
•Wipers not functioning at all

Diagnostic Steps

1
Inspect the wiper blades for visible wear, cracks, or damage.
2
Test the wiper function to see if they operate smoothly and effectively.
3
Check the wiper arm tension to ensure it is not loose or bent.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Park the vehicle in a safe, flat location and turn off the engine.
•Ensure the windshield is clean for better visibility during the replacement process.

Parts Required

•New windshield wiper blades (specific to the Volkswagen Golf MK7)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None required for this task.
Park the vehicle in a safe, flat location and turn off the engine.
Ensure the windshield is clean for better visibility during the replacement process.

2. Lift the Wiper Arms

Gently pull the wiper arm away from the windshield until it stands upright at about a 90-degree angle. This will allow for easier access to the wiper blade.

3. Remove Old Wiper Blades

Locate the release tab on the wiper blade where it connects to the wiper arm.
Press the release tab and slide the wiper blade downwards off the arm. Ensure to do this carefully to avoid damaging the arm.

4. Install New Wiper Blades

Take the new wiper blade and align it with the wiper arm.
Slide the wiper blade onto the arm until you hear a click, indicating it is securely attached.
Ensure the blade is oriented correctly to make proper contact with the windshield.

5. Lower Wiper Arms

Gently lower the wiper arms back to their original position against the windshield.
Confirm that the blades sit evenly against the glass.