how to reset the oil change light on my Volkswagen Tiguan First Generation (2007-2018)

Volkswagen Tiguan First Generation (2007-2018)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

350 words

Problem Statement

Learn how to reset the oil change light on your Volkswagen Tiguan (2007-2018) with this step-by-step guide. Ensure your dashboard is clear of warnings.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and the engine is off during the reset procedure.

Symptoms

•Oil change light illuminated on the dashboard
•Possible message on the display indicating service is due
•Engine oil replacement has recently been performed

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Turn the ignition off and then back to the 'ON' position.
4
Check if the oil change light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner (optional)

Parts Required

•None for the reset procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (if needed).
Ensure the vehicle is parked on a level surface and the ignition is off.

2. Ignition Position

Insert the key into the ignition and turn it to the "ON" position without starting the engine. This powers the dashboard lights.

3. Gas Pedal Procedure

Press the accelerator pedal down three times in quick succession within 10 seconds. Ensure the pedal is fully pressed down each time.

4. Turn Off Ignition

Turn the ignition back to the "OFF" position. Wait a few seconds to ensure the system resets.

5. Verify Reset

Turn the ignition back to the "ON" position and check the dashboard. The oil change light should be off. If it remains illuminated, repeat the procedure.