FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil light on a Volkswagen Tiguan First Generation (2007-2018) - Volkswagen Tiguan
Home/Cars/Volkswagen/Tiguan/First Generation (2007-2018)/how to reset the oil light on a Volkswagen Tiguan First Generation (2007-2018)

how to reset the oil light on a Volkswagen Tiguan First Generation (2007-2018)

Volkswagen Tiguan First Generation (2007-2018)

Error Codes
Less than 10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
356 words

Problem Statement

Learn how to reset the oil light on a Volkswagen Tiguan First Generation (2007-2018) after an oil change. Step-by-step guide included.

Affected Component
Electrical
Estimated Time
Less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe position and the engine is off before starting the reset procedure.

Symptoms

  • •Oil light illuminated on the dashboard
  • •Warning message in the instrument cluster
  • •Maintenance reminder displayed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Vehicle key or remote

Parts Required

  • •None required for the reset

Additional Information

Affected Component
Electrical
Estimated Time
Less than 10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools:
    • Key or remote for the vehicle.
  • Ensure the vehicle is parked on a level surface.
2. Resetting the Oil Light
  1. Insert the key into the ignition (or press the start button without pressing the brake).
  2. Do not start the engine; just turn the ignition to the "On" position.
  3. Locate the "0.0" button (often the trip reset button) on the dashboard.
  4. Press and hold the "0.0" button.
  5. While holding the button, turn the ignition to the "On" position (do not start the engine).
  6. Continue holding the button for about 10 seconds until the oil light blinks and then turns off, indicating the reset is successful.
  7. Release the button.