FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Tiguan First Generation (2007-2018) wipers won’t turn off how to fix - Volkswagen Tiguan
Home/Cars/Volkswagen/Tiguan/First Generation (2007-2018)/my Volkswagen Tiguan First Generation (2007-2018) wipers won’t turn off how to fix

my Volkswagen Tiguan First Generation (2007-2018) wipers won’t turn off how to fix

Volkswagen Tiguan First Generation (2007-2018)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
532 words

Problem Statement

Learn how to diagnose and fix wipers that won't turn off in Volkswagen Tiguan First Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Ensure the vehicle is in a stable position before working on any components.

Symptoms

  • •Wipers continue to operate even after turning off the switch
  • •Intermittent wiper function may not respond correctly
  • •Wiper motor may be running continuously
  • •Potential drain on the vehicle's battery
  • •Wiper control stalk may feel loose or unresponsive

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Pliers
  • •Screwdriver

Parts Required

  • •Wiper motor
  • •Wiper relay

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to avoid electrical shorts.
  • Tools required: OBD-II scanner, multimeter, socket set, pliers, screwdriver.
2. Remove Wiper Arm
  • Use a socket wrench to remove the nut securing the wiper arm to the motor.
  • Gently pry off the wiper arm using a wiper arm puller if necessary.
  • Set the wiper arm aside in a safe location.
3. Access and Replace Wiper Motor
  • Remove the cowl panel by unscrewing any screws and unclipping it.
  • Disconnect the electrical connector leading to the wiper motor.
  • Remove the bolts securing the wiper motor to the vehicle.
  • Install the new wiper motor by reversing the removal process, ensuring it is securely fastened and connected.
4. Inspect and Replace Wiper Relay
  • Locate the fuse box and identify the wiper relay using the diagram on the cover.
  • Remove the faulty relay and replace it with a new relay of the same specifications.
  • Reconnect any components that were removed during the process.
5. Reassemble and Test
  • Reinstall the cowl panel and wiper arm, tightening the securing nut to the manufacturer's specified torque (typically around 15 Nm).
  • Reconnect the negative battery terminal.
  • Test the wiper functionality by turning them on and off multiple times.