how to reset the oil light on Volkswagen Tiguan Second Generation (2018-present)

Volkswagen Tiguan 2nd Gen (2018-Present)

Error Codes

Less than 15 minutes

Time

easy

Difficulty

medium

Severity

2 min read

371 words

Problem Statement

Learn how to reset the oil light on your Volkswagen Tiguan (2018-present) after an oil change. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

Less than 15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stable position before performing the reset.

Symptoms

•Oil light remains illuminated on the dashboard
•Oil change has been performed but the light is still on
•Dashboard warning messages related to oil maintenance

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Check the dashboard to see if the oil light has turned off.
5
If the light remains on, repeat the process to ensure it was done correctly.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Check the dashboard to see if the oil light has turned off.
5
If the light remains on, repeat the process to ensure it was done correctly.

Solution

1. Preparation

Gather required tools: None specifically required for the reset.
Ensure the vehicle is parked safely and the ignition is off.

2. Turn Ignition On

Insert the ignition key and turn it to the "ON" position without starting the engine.
Alternatively, for push-start models, press the start button without pressing the brake pedal.

3. Reset Oil Light

Press the accelerator pedal fully three times within 10 seconds.
Wait for the oil light to reset, which should happen automatically.

4. Confirm Reset

Turn off the ignition and then turn it back on to check if the oil light has been successfully reset.
If the light is still on, repeat the reset process.