why does my Volkswagen Tiguan Second Generation (2018-present) shake when I accelerate

Volkswagen Tiguan 2nd Gen (2018-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

430 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Volkswagen Tiguan. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Ensure the vehicle is securely lifted and supported before working underneath it.

Symptoms

•Shaking or vibrations felt in the steering wheel or seat during acceleration
•Increased noise from the engine or drivetrain
•Possible loss of power during acceleration
•Uneven tire wear
•Steering wheel misalignment or pulling to one side

Diagnostic Steps

1
Inspect tires for uneven wear and ensure they are properly inflated.
2
Check for any visible damage to suspension components, such as control arms and bushings.
3
Perform a wheel balance check to see if any wheels are unbalanced.
4
Test drive the vehicle to replicate the shaking and note the conditions under which it occurs.
5
Scan the vehicle's onboard diagnostics for any error codes related to the engine or transmission.
6
Inspect the engine and transmission mounts for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Torque wrench
•Wheel balancer

Parts Required

•Tires (if damaged)
•Suspension components (if worn or damaged)
•Engine and transmission mounts (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear and ensure they are properly inflated.
2
Check for any visible damage to suspension components, such as control arms and bushings.
3
Perform a wheel balance check to see if any wheels are unbalanced.
4
Test drive the vehicle to replicate the shaking and note the conditions under which it occurs.
5
Scan the vehicle's onboard diagnostics for any error codes related to the engine or transmission.
6
Inspect the engine and transmission mounts for wear or damage.

Solution

1. Tire Inspection and Replacement

Sub-steps:
1. Remove the wheel covers or lug nut caps if applicable.
2. Loosen the lug nuts on the affected wheel using a lug wrench.
3. Lift the vehicle using a jack and secure it with jack stands.
4. Remove the wheel and inspect for uneven wear or damage; replace if necessary.

2. Suspension Component Repair or Replacement

Sub-steps:
1. Visually inspect control arms, tie rods, and bushings for wear.
2. If any components are damaged, remove them using a socket set and replace with OEM parts.
3. Reassemble and torque components to manufacturer specifications.

3. Wheel Balancing

Sub-steps:
1. Remove the wheel from the vehicle.
2. Take the wheel to a professional shop equipped with a wheel balancer.
3. Have the wheel balanced; add weights as necessary.
4. Reinstall the wheel and torque the lug nuts to specified values.

4. Engine and Transmission Mount Inspection

Sub-steps:
1. Inspect engine and transmission mounts visually for cracks or excessive wear.
2. If damaged, loosen the bolts securing the mount and replace with new mounts.
3. Torque the new mounts to manufacturer specifications.

Tools Required:

Jack and jack stands
Lug wrench
Socket set
Torque wrench
Wheel balancer (if not available in a DIY context, visit a professional)

Parts Required:

Tires (if damaged)
Suspension components (if worn or damaged)
Engine and transmission mounts (if necessary)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Always disconnect the battery before working on electrical components.
Ensure the vehicle is securely lifted and supported before working underneath it.