FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I resolve issues with the windshield wipers not functioning in a 2010 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How do I resolve issues with the windshield wipers not functioning in a 2010 Volvo XC60?

How do I resolve issues with the windshield wipers not functioning in a 2010 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
571 words

Problem Statement

Learn how to diagnose and fix windshield wiper issues on your 2010 Volvo XC60 with our step-by-step guide.

Affected Component
windshield wipers

Symptoms

  • •Windshield wipers do not operate at all.
  • •Wipers may operate intermittently or at incorrect speeds.
  • •Wipers may get stuck in the upright position.
  • •No sound from the wiper motor when activated.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Fuse puller or needle-nose pliers
  • •Screwdriver set (Phillips and flathead)
  • •Torque wrench (if necessary)
  • •Electrical contact cleaner
  • •Replacement fuses (if needed)
  • •Replacement wiper motor (if found defective)

Additional Information

Affected Component
windshield wipers
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Windshield Wipers Not Functioning on a 2010 Volvo XC60
Tools Required
  • Multimeter
  • Fuse puller or needle-nose pliers
  • Screwdriver set (Phillips and flathead)
  • Torque wrench (if necessary)
  • Electrical contact cleaner
  • Replacement fuses (if needed)
  • Replacement wiper motor (if found defective)
Repair Instructions

Step 1: Replace Blown Fuse

  1. Remove the blown fuse using a fuse puller or needle-nose pliers.
  2. Insert a new fuse of the correct amperage.
  3. Test the wipers again.

Step 2: Replace Wiper Switch (if necessary)

  1. Disconnect the negative battery terminal to prevent electrical shorts.
  2. Remove the steering column covers (usually requires unscrewing screws).
  3. Disconnect the wiper switch connector from the steering column.
  4. Remove the screws holding the wiper switch in place and replace it with a new switch.
  5. Reconnect everything and test the wipers again.

Step 3: Replace Wiper Motor (if necessary)

  1. Disconnect the negative battery terminal.
  2. Remove the wiper arms using a puller if necessary (be cautious not to damage the windshield).
  3. Unscrew the wiper motor assembly from its mount.
  4. Disconnect the motor wiring harness.
  5. Install the new wiper motor in reverse order:
    • Connect the wiring harness.
    • Secure the motor in place with screws.
    • Reattach the wiper arms.
  6. Reconnect the battery terminal and test the wipers.

Step 4: Inspect and Repair Wiring (if necessary)

  1. If there are damaged wires, use electrical contact cleaner to clean the connectors.
  2. Repair any damaged wiring by splicing in new wire or using heat-shrink tubing.
  3. Ensure that all connections are secure and insulated properly.
Conclusion

After performing the above diagnostic and repair steps, your windshield wipers should be functioning correctly. If issues persist, further investigation into the vehicle's electrical system may be necessary, or professional assistance may be required.