FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I troubleshoot a malfunctioning traction control in a 2015 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How do I troubleshoot a malfunctioning traction control in a 2015 Volvo XC60?

How do I troubleshoot a malfunctioning traction control in a 2015 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Error Code: C0031, C0041, C0051
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
657 words

Problem Statement

Learn how to troubleshoot and repair a malfunctioning traction control system in a 2015 Volvo XC60 with our step-by-step guide.

Error Code
C0031, C0041, C0051
Affected Component
Traction Control System
Estimated Time
2-4 hours

Symptoms

  • •Traction Control Warning Light illuminated
  • •Reduced Power or Engine Hesitation
  • •Unresponsive Traction Control
  • •ABS Warning Light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter or Ohmmeter
  • •Basic hand tools (screwdriver, wrench set)
  • •Volvo VIDA/DICE diagnostic tool

Additional Information

Error Code
C0031, C0041, C0051
Affected Component
Traction Control System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Troubleshooting a Malfunctioning Traction Control System in a 2015 Volvo XC60

Step 1: Initial Inspection

  • Visual Check: Inspect the vehicle for any visible damage to the wheels, tires, or suspension components.
  • Tire Condition: Ensure all tires are properly inflated and in good condition. Uneven tire wear can affect traction control.

Step 2: Scan for Error Codes

  • Tools Required:
    • OBD-II Scanner
  • Procedure:
    1. Connect the OBD-II scanner to the vehicle’s diagnostic port (usually located under the dashboard).
    2. Turn the ignition to the "ON" position without starting the engine.
    3. Scan for any stored trouble codes related to the traction control or ABS systems.
    4. Record any codes that appear for further analysis.

Step 3: Review Diagnostic Trouble Codes (DTCs)

  • Common Codes:
    • C0031 – Wheel Speed Sensor Fault
    • C0041 – ABS Module Fault
    • C0051 – Traction Control System Fault
  • Research each code to determine the potential issues related to the TCS.

Step 4: Inspect Wheel Speed Sensors

  • Tools Required:
    • Multimeter or Ohmmeter
    • Basic hand tools (screwdriver, wrench set)
  • Procedure:
    1. Raise the vehicle using a jack and secure it with jack stands.
    2. Locate the wheel speed sensors at each wheel hub.
    3. Disconnect the electrical connector from each sensor.
    4. Use a multimeter to check the resistance of each sensor (typically 1,000-1,500 ohms is normal). If the reading is outside this range, replace the sensor.
    5. Inspect the wiring harness for any signs of damage or shorts.

Step 5: Check ABS Module

  • Tools Required:
    • OBD-II Scanner
  • Procedure:
    1. Using the OBD-II scanner, check for any communication errors with the ABS module.
    2. If codes indicate a module fault, further diagnostics may be required, or the module may need to be replaced.

Step 6: Inspect for Software Updates

  • Tools Required:
    • Volvo VIDA/DICE diagnostic tool (for dealer-level diagnostics)
  • Procedure:
    1. Connect the VIDA/DICE tool to the vehicle.
    2. Check for any available software updates for the traction control or ABS systems.
    3. Update the software if necessary, as this can resolve many electronic issues.
Repair Instructions

Repairing Wheel Speed Sensors

  1. If a wheel speed sensor is faulty:
    • Remove the sensor from the hub by unscrewing the retaining bolt.
    • Install the new sensor in reverse order of removal, ensuring it is seated properly.
    • Reconnect the electrical connector.

Replacing the ABS Module

  1. If the ABS module is faulty:
    • Disconnect the negative battery terminal to prevent electrical shorts.
    • Remove any covers or brackets that obstruct access to the ABS module.
    • Disconnect the electrical connectors from the module.
    • Unbolt the module from its mounting location and replace it with a new module.
    • Reconnect the electrical connectors and reassemble any removed components.

Resetting the Traction Control System

  1. After repairs, clear any fault codes using the OBD-II scanner or VIDA/DICE tool.
  2. Reconnect the battery and start the vehicle to check if the traction control light is off and the system operates correctly.
Final Steps
  • Take the vehicle for a test drive in a controlled environment to ensure that the traction control system functions as intended.
  • Monitor for any warning lights and confirm that the vehicle's handling is stable under various driving conditions.

By following these steps, you should be able to effectively troubleshoot and repair a malfunctioning traction control system in a 2015 Volvo XC60.