FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Volvo/XC60/First Generation (2008-2017)/how to fix P0302 misfire code on my Volvo XC60 First Generation (2008-2017)

how to fix P0302 misfire code on my Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes
Severity: highDifficulty: mediumError Code: P03022-4 hours
3 min read
588 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0302
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical components.
  • ⚠Allow the engine to cool before performing any repairs to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or engine shaking
  • •Loss of power during acceleration
  • •Increased fuel consumption
  • •Possible engine stalling
  • •Unusual engine noises (such as popping or backfiring)

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the P0302 code.
  2. 2Inspect the ignition system components, including spark plug and ignition coil for cylinder 2.
  3. 3Check fuel injector operation for cylinder 2 using a noid light or multimeter.
  4. 4Perform a compression test on cylinder 2 to check for mechanical issues.
  5. 5Inspect for vacuum leaks around the intake manifold and cylinder 2 area.
  6. 6Test the engine's fuel pressure to ensure proper fuel delivery.

Solution

Solution

1. Preparation

  • Gather tools and parts required for repair.
  • Disconnect the negative battery terminal to prevent electrical shorts.
  • Allow the engine to cool down.

2. Inspect and Replace Ignition Components

  • Tools Required: Socket set, torque wrench, spark plug socket, dielectric grease.
  • Remove the engine cover if applicable.
  • Remove the ignition coil from cylinder 2 by unscrewing the bolts and disconnecting the electrical connector.
  • Inspect the ignition coil for cracks or damage; replace if necessary.
  • Remove the spark plug from cylinder 2 using a spark plug socket.
  • Inspect the spark plug for wear or fouling; replace with the manufacturer's specified spark plug if needed.
  • Apply dielectric grease to the new spark plug threads before installation.
  • Reinstall the spark plug and torque to the manufacturer's specifications (typically around 15-20 ft-lbs).
  • Reinstall the ignition coil and secure it with bolts. Reconnect the electrical connector.

3. Inspect and Replace Fuel Injector (if necessary)

  • Tools Required: Socket set, fuel line disconnect tool, torque wrench.
  • If the fuel injector is suspected to be faulty, disconnect the fuel line using a fuel line disconnect tool (be cautious of fuel spillage).
  • Remove the retaining clips and disconnect the electrical connector from the fuel injector.
  • Remove the fuel injector from the rail and inspect for any debris or damage.
  • Replace the fuel injector with a new one, ensuring to lubricate the O-rings with clean engine oil before installation.
  • Reinstall the fuel line and secure it properly.

4. Reassemble and Reconnect Battery

  • Reinstall any components removed during the procedure.
  • Reconnect the negative battery terminal.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Spark plug socket
  • •Fuel line disconnect tool
  • •Multimeter

Parts Required

  • •Spark plug(s)
  • •Ignition coil (for cylinder 2)
  • •Fuel injector (if necessary)

Additional Information

Error Code
P0302
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

  1. What are the signs of a failing alternator in a 2009 Volvo XC60?

    Learn about the signs of a failing alternator in a 2009 Volvo XC60, including symptoms, diagnostic steps, and repair instructions.

    alternator6 symptoms

  2. How do I fix the infotainment system freeze in my 2014 Volvo XC60?

    Follow this step-by-step guide to diagnose and fix the infotainment system freeze issue in your 2014 Volvo XC60.

    infotainment system5 symptoms

  3. How do I fix the problem of my 2012 Volvo XC60's heated seats not working?

    Learn how to diagnose and fix non-working heated seats in your 2012 Volvo XC60 with step-by-step instructions and required tools.

    heated seats3 symptoms

  4. What are the common causes of engine stalling in the 2014 Volvo XC60?

    Learn about the common causes of engine stalling in the 2014 Volvo XC60, including symptoms, diagnostic steps, and repair instructions.

    engine4 symptoms

  5. What does error code P0016 indicate for my 2011 Volvo XC60?

    Learn about error code P0016 for your 2011 Volvo XC60, including symptoms, diagnostic steps, and repair instructions.

    P0016Crankshaft and Camshaft Position Sensors6 symptoms

  6. How do I identify a water leak in my 2013 Volvo XC60?

    Learn how to identify and repair water leaks in your 2013 Volvo XC60 with systematic inspection and testing steps.

    interior and electrical systems5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation