FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Volvo/XC60/First Generation (2008-2017)/how to fix P0303 misfire code in Volvo XC60 First Generation (2008-2017)

how to fix P0303 misfire code in Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes
Severity: highDifficulty: mediumError Code: P03032-4 hours
4 min read
638 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0303 cylinder 3 misfire in Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0303
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before opening any components to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Rough idle
  • •Loss of power during acceleration
  • •Increased fuel consumption
  • •Engine stalling intermittently

Diagnostic Steps

  1. 1Scan the vehicle's OBD-II system for error codes to confirm P0303 and check for any additional codes.
  2. 2Inspect ignition components, including spark plugs and ignition coils, specifically for cylinder 3.
  3. 3Check the fuel injector operation for cylinder 3 using a noid light or multimeter.
  4. 4Perform a compression test on cylinder 3 to assess engine health.
  5. 5Inspect vacuum hoses and intake manifold for leaks that could affect cylinder 3.
  6. 6Test for any issues with the engine control module (ECM) or wiring related to cylinder 3.

Solution

Solution

1. Preparation

  • Gather tools and parts needed for the repair.
  • Disconnect the battery to prevent electrical shorts.
  • Allow the engine to cool down if it has been running.

Tools Required:

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Noid light or multimeter
  • Compression tester
  • Screwdrivers
  • Pliers

2. Inspect and Replace Spark Plug

  • Remove the engine cover if applicable.
  • Use a socket to remove the spark plug from cylinder 3.
  • Inspect the spark plug for wear, carbon deposits, or damage.
  • If necessary, replace the spark plug with a new one, ensuring it is gapped correctly according to manufacturer specifications.
  • Torque the spark plug to the recommended specification (usually around 15-20 ft-lbs for most Volvo engines).

3. Inspect and Replace Ignition Coil

  • Disconnect the electrical connector from the ignition coil on cylinder 3.
  • Remove the ignition coil using a socket and pull it straight out.
  • Inspect for wear or damage.
  • Replace with a new ignition coil if necessary.
  • Reconnect the electrical connector.

4. Check and Clean Fuel Injector

  • Disconnect the fuel injector connector for cylinder 3.
  • Remove the fuel injector using the appropriate tool.
  • Inspect the injector for clogs or damage.
  • If the injector is clogged, clean it or replace it with a new one as needed.
  • Reinstall the injector and reconnect the electrical connector.

5. Perform Compression Test

  • Remove the spark plug from cylinder 3.
  • Insert the compression tester into the spark plug hole.
  • Crank the engine and read the compression value.
  • Compare the reading to the manufacturer's specifications; if it’s below the acceptable range, additional engine repairs may be necessary.

6. Reassemble Components

  • Reinstall the spark plug and ignition coil.
  • Reattach any components that were removed during inspection.
  • Reconnect the battery.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Noid light or multimeter
  • •Compression tester
  • •Screwdrivers
  • •Pliers

Parts Required

  • •Spark plug for cylinder 3
  • •Ignition coil for cylinder 3
  • •Fuel injector for cylinder 3 (if needed)

Additional Information

Error Code
P0303
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
7 items
Parts Required
3 items

Related Faults

  1. What should I do if my 2011 Volvo XC60 has a persistent oil leak?

    Learn how to diagnose and repair a persistent oil leak in your 2011 Volvo XC60 with step-by-step instructions and required tools.

    Engine4 symptoms

  2. How can I troubleshoot the issue of my 2014 Volvo XC60's wipers not functioning?

    Learn how to diagnose and repair wiper issues on your 2014 Volvo XC60 with step-by-step instructions and required tools.

    wiper system3 symptoms

  3. What are the common issues with the engine mounts in a 2010 Volvo XC60?

    Learn about the common issues with engine mounts in a 2010 Volvo XC60, including symptoms, diagnostic steps, and repair instructions.

    engine mounts5 symptoms

  4. What are the common causes of engine stalling in the Volvo XC60 First Generation?

    Explore the common causes of engine stalling in the Volvo XC60 First Generation (2008-2017), including symptoms, diagnostic steps, and repair instructions.

    Engine12 symptoms

  5. What does error code P0016 indicate for my 2011 Volvo XC60?

    Learn about error code P0016 for your 2011 Volvo XC60, including symptoms, diagnostic steps, and repair instructions.

    P0016Crankshaft and Camshaft Position Sensors6 symptoms

  6. What are the typical causes of a blown fuse in the 2010 Volvo XC60?

    Learn about the typical causes of a blown fuse in the 2010 Volvo XC60, symptoms, diagnostic steps, and repair instructions to fix electrical issues.

    Electrical System4 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation