FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Volvo/XC60/First Generation (2008-2017)/how to fix the P0133 code on my Volvo XC60 First Generation (2008-2017)

how to fix the P0133 code on my Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes
Severity: mediumDifficulty: mediumError Code: P01331-2 hours
3 min read
521 words

Problem Statement

Learn how to diagnose and fix P0133 O2 sensor slow response in Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0133
Affected Component
Exhaust System
Estimated Time
1-2 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before touching exhaust components.

Symptoms

  • •Check engine light illuminated
  • •Decreased fuel efficiency
  • •Rough idle or engine misfire
  • •Poor acceleration or performance issues
  • •Increased emissions

Diagnostic Steps

  1. 1Scan the vehicle with an OBD-II scanner to confirm the P0133 code and check for any additional codes.
  2. 2Inspect the wiring and connectors for the upstream oxygen sensor for any damage, corrosion, or loose connections.
  3. 3Check the oxygen sensor heater circuit using a multimeter to verify it is functioning properly.
  4. 4Inspect the exhaust system for leaks that could affect oxygen sensor readings.
  5. 5Measure the voltage output from the oxygen sensor with a multimeter while the engine is running to see if it fluctuates properly.
  6. 6If all else checks out, consider testing the ECU for potential software issues or updates.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Disconnect the battery to prevent any electrical shorts.

2. Remove the Oxygen Sensor

  • Locate the upstream oxygen sensor (Bank 1 Sensor 1) on the exhaust manifold.
  • Use a socket wrench with an oxygen sensor socket to carefully unscrew the sensor from its mounting.
  • Disconnect the wiring harness from the oxygen sensor.

3. Inspect and Clean

  • Inspect the sensor's threads for carbon buildup or damage; clean if necessary.
  • Check the wiring and connector for any signs of wear or corrosion. Clean the connector contacts with electrical contact cleaner.

4. Install New Oxygen Sensor

  • Apply anti-seize compound to the threads of the new oxygen sensor to prevent seizing.
  • Screw the new oxygen sensor into place and tighten to the manufacturer's specifications (generally around 30 ft-lbs).
  • Reconnect the wiring harness to the new sensor.

5. Reconnect Battery and Test

  • Reconnect the battery terminals.
  • Start the engine and let it idle for a few minutes.
  • Use an OBD-II scanner to clear the codes and check for any reoccurrence of the P0133 code.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set with oxygen sensor socket
  • •Multimeter
  • •Electrical contact cleaner

Parts Required

  • •New upstream oxygen sensor (Bank 1 Sensor 1)

Additional Information

Error Code
P0133
Affected Component
Exhaust System
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
1 item

Related Faults

  1. How do I diagnose a malfunctioning throttle position sensor in my 2011 Volvo XC60?

    Learn how to diagnose and replace a malfunctioning throttle position sensor in your 2011 Volvo XC60 with step-by-step instructions and required tools.

    P0120, P0121, P0122, P0123Throttle Position Sensor5 symptoms

  2. What are the typical causes of a blown fuse in the 2010 Volvo XC60?

    Learn about the typical causes of a blown fuse in the 2010 Volvo XC60, symptoms, diagnostic steps, and repair instructions to fix electrical issues.

    Electrical System4 symptoms

  3. What is the most common issue with the XC60's power steering system?

    Learn about the common power steering system failures in the Volvo XC60, including symptoms, diagnostic steps, and repair instructions.

    power steering system5 symptoms

  4. How do I diagnose a malfunctioning ABS system in my 2012 Volvo XC60?

    Learn how to diagnose and repair a malfunctioning ABS system in your 2012 Volvo XC60 with our step-by-step guide.

    ABS system5 symptoms

  5. How do I diagnose a malfunctioning mass airflow sensor in my 2011 Volvo XC60?

    Learn how to diagnose and repair a malfunctioning mass airflow sensor in your 2011 Volvo XC60 with step-by-step instructions and required tools.

    Mass Airflow Sensor5 symptoms

  6. Why does my 2013 Volvo XC60 have a loss of engine power during acceleration?

    Learn how to diagnose and fix loss of engine power during acceleration in a 2013 Volvo XC60 with our detailed guide.

    Engine Power System5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation