how to reset the service light on my Volvo XC60 First Generation (2008-2017)?

Volvo XC60 First Generation (2008-2017)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

352 words

Problem Statement

Learn how to reset the service light on your Volvo XC60 First Generation (2008-2017) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, parked location while performing the reset.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder appears on the display
•Vehicle may indicate that service is overdue

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition without turning it to the 'On' position.
3
Press and hold the 'Trip' button located on the dashboard.
4
Turn the key to the 'On' position while continuing to hold the 'Trip' button.
5
Wait for the service light to flash and then go off, indicating the reset is complete.
6
Release the 'Trip' button and turn the ignition off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked in a safe location and is turned off.

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition without turning it to the 'On' position.
3
Press and hold the 'Trip' button located on the dashboard.
4
Turn the key to the 'On' position while continuing to hold the 'Trip' button.
5
Wait for the service light to flash and then go off, indicating the reset is complete.
6
Release the 'Trip' button and turn the ignition off.

Solution

1. Preparation

Tools Required: None
Ensure the vehicle is parked in a safe location and is turned off.

2. Resetting the Service Light

Insert the Key:
- Place the key in the ignition without turning it.
Press the Trip Button:
- Locate the "Trip" button on the instrument cluster and press and hold it.
Turn on Ignition:
- While holding the "Trip" button, turn the ignition key to the "On" position.
Wait for Confirmation:
- Observe the service light; it should begin to flash before turning off completely.
Release the Button:
- Once the light is off, release the "Trip" button.
Turn Off the Ignition:
- Turn the ignition key back to the "Off" position.