how to reset the service light on my Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

379 words

Problem Statement

Learn how to reset the service light on your Volvo XC60 First Generation (2008-2017) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' or 'Neutral' before attempting to reset the service light.

Symptoms

•Service light remains illuminated on the dashboard
•Message indicating 'Service Required' or similar on the display
•No other engine or electrical issues present

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Press the 'Trip' button on the instrument cluster to cycle through the display until 'Service' is shown.
3
Press and hold the 'Trip' button until the service light starts to flash.
4
Release the 'Trip' button and then press it again to confirm the reset.
5
Turn off the ignition and then start the engine to verify the service light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Press the 'Trip' button on the instrument cluster to cycle through the display until 'Service' is shown.
3
Press and hold the 'Trip' button until the service light starts to flash.
4
Release the 'Trip' button and then press it again to confirm the reset.
5
Turn off the ignition and then start the engine to verify the service light is off.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather necessary tools: None required for this process.

2. Ignition On

Insert the ignition key and turn it to the "On" position without starting the engine.
Ensure all electronic systems are powered without the engine running.

3. Access Service Light Reset

Locate the "Trip" button on the instrument cluster.
Press the "Trip" button to display the service message on the dashboard.

4. Reset the Service Light

Press and hold the "Trip" button until the service light begins to flash.
Release the "Trip" button.
Press the "Trip" button once more to confirm the reset.

5. Verify Reset

Turn the ignition off.
Start the engine and check that the service light is no longer illuminated.