FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common causes of a check brake system warning in a 2014 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/What are the common causes of a check brake system warning in a 2014 Volvo XC60?

What are the common causes of a check brake system warning in a 2014 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
692 words

Problem Statement

Discover the common causes, symptoms, and diagnostic steps for the 'Check Brake System' warning in a 2014 Volvo XC60. Learn how to address issues effectively.

Affected Component
braking system
Estimated Time
2-4 hours

Symptoms

  • •Warning light illuminated on the dashboard.
  • •Spongy or soft brake pedal feel.
  • •Grinding noise when braking.
  • •Unusual vibration during braking.
  • •Increased stopping distance.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Brake fluid tester
  • •Socket set (for wheel removal)
  • •Torque wrench
  • •Brake pad gauge
  • •Multimeter (for electrical testing)
  • •Brake cleaner
  • •Clean rags or paper towels

Additional Information

Affected Component
braking system
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Common Causes of "Check Brake System" Warning in a 2014 Volvo XC60

The "Check Brake System" warning in a 2014 Volvo XC60 can be triggered by several issues related to the vehicle's braking system. Here are the common causes:

  1. Low Brake Fluid Level
  2. Worn Brake Pads
  3. Faulty Brake Sensor
  4. Brake System Leak
  5. ABS Malfunction
  6. Electronic Parking Brake Issue
  7. Faulty Master Cylinder
Tools Required
  • OBD-II Scanner
  • Brake fluid tester
  • Socket set (for wheel removal)
  • Torque wrench
  • Brake pad gauge
  • Multimeter (for electrical testing)
  • Brake cleaner
  • Clean rags or paper towels
Repair Instructions

Step 1: Addressing Low Brake Fluid Level

  1. Locate the Brake Fluid Reservoir

    • Typically found near the driver's side, near the engine compartment.

  2. Check Fluid Level

    • If low, top off with the manufacturer-recommended brake fluid (DOT 4 for most Volvos).

  3. Inspect for Leaks

    • If the fluid was low, inspect brake lines, calipers, and master cylinder for leaks.

Step 2: Replacing Worn Brake Pads

  1. Remove Wheel

    • Loosen lug nuts before lifting the vehicle with a jack. Remove the wheel.

  2. Inspect Brake Pads

    • Measure the thickness of the pads. Replace if worn (less than 3mm thickness).

  3. Remove Caliper

    • Unbolt the caliper from the bracket and slide it off the rotor.

  4. Replace Pads

    • Remove old pads and install new ones.
    • Ensure the pad clips are properly seated.

  5. Reinstall Caliper

    • Return the caliper to its original position and torque bolts to manufacturer specs.

  6. Reinstall Wheel

    • Place the wheel back on and torque lug nuts to specification.

Step 3: Testing and Replacing Brake Sensors

  1. Inspect Connections

    • Check for any damaged wiring or disconnections.

  2. Test Sensor Functionality

    • Use a multimeter to check resistance and continuity. Replace if faulty.

Step 4: Checking ABS Module

  1. Examine Wiring and Connectors

    • Inspect for frayed wires or poor connections.

  2. Scan for ABS Codes

    • Address any stored codes that indicate ABS problems.

Step 5: Testing the Electronic Parking Brake

  1. Engage and Disengage Parking Brake

    • Listen for unusual noises or failure to engage.

  2. Inspect Wiring

    • Check the wiring and connectors of the electronic parking brake motor.

  3. Perform Calibration if Necessary

    • Follow the manufacturer’s procedure to recalibrate the electronic parking brake if required.
Final Steps
  • After repairs, clear any DTCs using the OBD-II scanner.
  • Test drive the vehicle to ensure the warning light does not reappear and that brakes function correctly.
  • If the warning persists, further diagnostics may be required, potentially involving more advanced brake system components or a visit to a professional technician.
Conclusion

Addressing the "Check Brake System" warning on a 2014 Volvo XC60 involves thorough inspection and repair of various braking components. Always prioritize safety and consult the vehicle manual for specific torque settings and fluid specifications. If any uncertainties arise, seeking professional assistance is advisable.