FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What causes the windshield wipers to stop working in a 2009 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/What causes the windshield wipers to stop working in a 2009 Volvo XC60?

What causes the windshield wipers to stop working in a 2009 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
651 words

Problem Statement

Learn how to diagnose and repair windshield wiper issues in a 2009 Volvo XC60 with step-by-step instructions and common causes.

Affected Component
windshield wipers
Estimated Time
2-4 hours

Symptoms

  • •Wipers do not move when activated.
  • •Wipers move intermittently or only in certain modes.
  • •No sound or movement from the wiper motor.
  • •Wiper blades may be stuck in a specific position.
  • •Wipers operate erratically or at the wrong speed.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Basic hand tools
  • •Flashlight
  • •Fuse puller or needle-nose pliers
  • •Multimeter
  • •Screwdriver
  • •Socket set
  • •Pliers

Additional Information

Affected Component
windshield wipers
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnosing Windshield Wiper Issues in a 2009 Volvo XC60

Common Causes
  1. Faulty Wiper Motor: The motor may have failed due to age or electrical issues.
  2. Wiper Relay Issues: A blown fuse or a malfunctioning relay can interrupt power to the wiper motor.
  3. Broken Wiper Linkage: The mechanical linkage between the motor and wiper arms may be broken.
  4. Electrical Issues: Problems with wiring or connectors may prevent power from reaching the motor.
  5. Faulty Wiper Switch: The switch on the steering column may be defective.
  6. Fuses: A blown fuse can stop the wipers from functioning.
Step 1: Visual Inspection
  • Tools Required: Basic hand tools, flashlight.
  • Check the wiper blades for physical damage or obstruction.
  • Inspect the wiper arm for any visible signs of wear or damage.
  • Examine the linkage for any disconnects.
Step 2: Check the Wiper Fuse
  • Tools Required: Fuse puller or needle-nose pliers, multimeter (optional).
  • Locate the fuse box (typically under the dashboard or in the engine compartment).
  • Find the wiper fuse (refer to the owner's manual for the exact location).
  • Inspect the fuse for continuity. Replace it if blown.
Step 3: Test the Wiper Switch
  • Tools Required: Multimeter.
  • Access the wiper switch by removing the steering column cover.
  • Use the multimeter to check for continuity in the switch when toggled.
  • If no continuity, the switch may need replacement.
Step 4: Test the Wiper Motor
  • Tools Required: Multimeter, screwdriver.
  • Disconnect the wiper motor connector.
  • Using the multimeter, check for voltage at the motor connector (typically 12V).
  • If voltage is present and the motor does not operate, the motor likely needs replacement.
Step 5: Inspect the Wiper Linkage
  • Tools Required: Socket set, pliers, flashlight.
  • Remove the wiper arms by unscrewing the nuts at the base.
  • Remove the cowl panel to access the motor and linkage.
  • Check the linkage for any disconnections or breaks.
Repair Instructions
Repairing or Replacing the Wiper Motor
  1. Disconnect the negative battery terminal to ensure safety.
  2. Remove the wiper arms by loosening the nuts and lifting them off.
  3. Remove the cowl panel by unscrewing it (if applicable).
  4. Disconnect the wiring harness from the wiper motor.
  5. Unscrew the motor from its mounting.
  6. Install the new motor by following the removal steps in reverse.
  7. Reconnect the wiring harness and reattach the cowl panel.
Replacing the Wiper Switch
  1. Disconnect the negative battery terminal.
  2. Remove the steering column cover by undoing screws.
  3. Disconnect the wiring harness from the old switch.
  4. Remove the switch retaining screws and take out the switch.
  5. Install the new switch and reconnect the wiring.
  6. Reassemble the steering column cover.
Repairing the Linkage
  1. Disconnect the battery and follow steps to access the wiper motor.
  2. Inspect the linkage for broken or disconnected parts.
  3. If broken, replace the linkage assembly as needed.
  4. Reassemble everything according to the disassembly steps.
Final Steps
  • Reconnect the battery terminal.
  • Test the wipers in all modes to ensure proper operation.
  • Ensure that wiper blades are correctly positioned and functioning smoothly.
Conclusion

By following the above diagnostic and repair steps, you should be able to determine and resolve the issue with the windshield wipers on your 2009 Volvo XC60. If the problem persists after these steps, it may be necessary to consult a professional technician for further diagnosis.