FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What could cause the tire pressure monitoring system warning to activate in a 2013 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/What could cause the tire pressure monitoring system warning to activate in a 2013 Volvo XC60?

What could cause the tire pressure monitoring system warning to activate in a 2013 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
660 words

Problem Statement

Learn about the causes, symptoms, and diagnostic steps for the tire pressure monitoring system warning in a 2013 Volvo XC60.

Affected Component
Tire Pressure Monitoring System (TPMS)

Symptoms

  • •Dashboard Warning Light
  • •Tire Pressure Low
  • •Poor Handling
  • •Tire Noise

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Tire pressure gauge
  • •OBD-II scanner (with TPMS capability)
  • •Tire inflator (compressor)
  • •Torque wrench
  • •Tire repair kit (if necessary)
  • •Digital multimeter (for sensor testing)
  • •Service manual for specific vehicle data

Additional Information

Affected Component
Tire Pressure Monitoring System (TPMS)
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Tire Pressure Monitoring System Warning Activation in a 2013 Volvo XC60
Possible Causes
  1. Low Tire Pressure: One or more tires have pressure below the recommended level.
  2. Faulty TPMS Sensor: A malfunctioning tire pressure sensor may trigger the warning light.
  3. Sensor Battery Failure: The battery in the TPMS sensor may have died, preventing it from transmitting data.
  4. Tire Damage: A puncture or other damage may lead to rapid air loss.
  5. Temperature Changes: Significant temperature fluctuations can affect tire pressure.
  6. System Malfunction: A fault in the TPMS control module or wiring may cause false warnings.

Tools Required

  • Tire pressure gauge
  • OBD-II scanner (with TPMS capability)
  • Tire inflator (compressor)
  • Torque wrench
  • Tire repair kit (if necessary)
  • Digital multimeter (for sensor testing)
  • Service manual for specific vehicle data

Step 1: Visual Inspection

  1. Check All Tires: Inspect each tire visually for signs of damage, such as punctures, cuts, or bulges.
  2. Check Valve Stems: Ensure all valve stems are intact and not leaking air.

Step 2: Measure Tire Pressure

  1. Tire Pressure Gauge: Use a tire pressure gauge to check the pressure of each tire.
  2. Compare with Recommended Levels: Refer to the vehicle's door placard for the recommended tire pressures (usually found on the driver’s side door frame).

Step 3: Inflate Tires

  1. Inflate Low Tires: If any tires are below the recommended pressure, inflate them to the correct level.
  2. Recheck Pressure: After inflating, recheck the pressure with the tire gauge.

Step 4: Reset TPMS (If Applicable)

  1. Vehicle Ignition: Turn the ignition to the "ON" position without starting the engine.
  2. Reset Procedure: Depending on the model, locate the TPMS reset button (usually found under the steering wheel) and press it until the TPMS light blinks three times.
  3. Start Engine: Start the vehicle and allow the system to recalibrate.

Step 5: Scan for Fault Codes

  1. OBD-II Scanner: Connect the OBD-II scanner to the vehicle's diagnostic port.
  2. Read Codes: Access the TPMS module and read any fault codes that may indicate specific issues with the sensors or system.
  3. Document Codes: Note any codes for further investigation or troubleshooting.

Step 6: Sensor Testing

  1. Visual Inspection of Sensors: Check the physical condition of the TPMS sensors mounted on the wheels.
  2. Digital Multimeter: If the sensor is suspected to be faulty, remove the wheel and the sensor, and use a multimeter to test the battery voltage (typically 3V). Replace if necessary.
Repair Instructions

Repairing Low Tire Pressure

  1. Inflate Tires: Inflate all tires to the specified pressure.
  2. Repair Damage: If a tire is damaged, use a tire repair kit or consult a professional for patching.

Replacing TPMS Sensors

  1. Remove Wheel: Lift the vehicle and remove the wheel using a torque wrench.
  2. Remove Sensor: Unscrew the sensor from the valve stem and replace it with a new one.
  3. Reinstall Wheel: Reinstall the wheel and torque the lug nuts to the manufacturer’s specifications.

If System Malfunctions

  1. Inspect Wiring: Check the wiring harnesses connected to the TPMS control module for damage or disconnections.
  2. Replace Module: If the system continues to malfunction after checking components, consider replacing the TPMS control module.
Conclusion

After performing these steps, monitor the TPMS warning light. If the light remains illuminated despite correcting tire pressures and verifying sensor functionality, further diagnosis may be required by a professional technician.