What does it mean if my 2010 Volvo XC60 has a message about the anti-skid service required?

Volvo XC60 First Generation (2008-2017)

Error Codes

medium

Difficulty

medium

Severity

3 min read

589 words

Problem Statement

Learn about the 'Anti-Skid Service Required' message on your 2010 Volvo XC60, including symptoms, diagnostic steps, and repair instructions.

Affected Component

traction control system, ABS module

Symptoms

•Warning message displayed on the dashboard.
•Traction control light or ABS light illuminates.
•Reduced traction control functionality.
•Possible abnormal braking behavior (e.g., longer stopping distance).

Diagnostic Steps

1
Retrieve Diagnostic Trouble Codes (DTCs)
2
Visual Inspection
3
Test Wheel Speed Sensors
4
Check ABS Module and Wiring

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle service manual
•Basic hand tools (screwdrivers, socket set)
•Multimeter (optional)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Issue: Anti-Skid Service Required Message on 2010 Volvo XC60

When the "Anti-Skid Service Required" message appears on your 2010 Volvo XC60, it indicates a potential issue with the vehicle's traction control system, which may also affect the anti-lock braking system (ABS). This could be due to various factors, including sensor malfunctions, wiring issues, or problems with the control module.

Step 1: Retrieve Diagnostic Trouble Codes (DTCs)

Tools Required:

OBD-II scanner (preferably one compatible with Volvo).
Vehicle service manual or access to a repair database for reference.

Plug the OBD-II scanner into the vehicle’s diagnostic port (usually located under the dashboard on the driver's side).
Turn the ignition to the "On" position without starting the engine.
Use the scanner to read any stored DTCs related to the ABS and traction control system.
Take note of the codes for further analysis.

Step 2: Visual Inspection

Tools Required:

Basic hand tools (screwdrivers, socket set).
Multimeter (optional).

Open the hood and inspect the ABS module and wiring harness for visible damage or corrosion.
Check the wheel speed sensors at each wheel for dirt, damage, or loose connections.
Ensure that the brake fluid level is adequate and that there are no leaks in the brake system.

Step 3: Test Wheel Speed Sensors

Disconnect each wheel speed sensor connector and inspect for corrosion or damage.
Use a multimeter to measure the resistance of each sensor (refer to the service manual for specific resistance values).
If any sensor is out of specification, replace it.

Step 4: Check ABS Module and Wiring

Inspect the wiring to the ABS module for any frays or shorts.
Check the ABS module’s connector for corrosion or loose connections.
If necessary, perform a continuity test on the wiring from the wheel speed sensors to the ABS module.

Repair Instructions

Repairing Wheel Speed Sensors

If a sensor is faulty:
- Disconnect the battery to prevent any electrical shorts.
- Remove the wheel (if necessary) to access the wheel speed sensor.
- Unplug the faulty sensor and remove it from its mounting.
- Install the new sensor in the reverse order, ensuring it is correctly positioned.
- Reconnect the battery and clear any DTCs with the OBD-II scanner.

Repairing ABS Module Issues

If the ABS module is faulty:
- Disconnect the battery.
- Remove any components blocking access to the ABS module (refer to the service manual).
- Unplug the ABS module from its connector.
- Replace it with a new or refurbished module (ensure it is compatible with your model).
- Reassemble all components and reconnect the battery.
- Clear any DTCs and test drive the vehicle to ensure the issue is resolved.

Final Steps

After repairs, clear the DTCs using the OBD-II scanner.
Start the vehicle and verify that the warning message has cleared and that the traction control system is functioning properly.
Test drive the vehicle under various conditions to ensure the issue has been fully resolved.

Conclusion

If the "Anti-Skid Service Required" message persists after following these diagnostic and repair steps, it may be necessary to consult with a professional Volvo technician for further diagnosis, as advanced troubleshooting or specialized tools may be required.