what does it mean if my Volvo XC60 is throwing a C0035 code

Volvo XC60 First Generation (2008-2017)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

Error Code: C0035

3 min read

530 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix C0035 left front wheel speed sensor issues in Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

C0035

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Ensure vehicle is properly supported on jack stands before working underneath.

Symptoms

•Check engine light illuminated
•ABS warning light activated
•Traction control warning light illuminated
•Inconsistent speedometer readings
•Unusual ABS behavior during braking

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm C0035 and check for any related codes.
2
Inspect the left front wheel speed sensor wiring and connectors for damage or corrosion.
3
Measure the resistance across the wheel speed sensor terminals using a multimeter; compare with manufacturer specifications.
4
Inspect the tone ring for any signs of damage or debris that could affect sensor readings.
5
Check the brake fluid level and inspect for any leaks in the brake system that may affect sensor performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Lug wrench
•Torque wrench

Parts Required

•Left front wheel speed sensor

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm C0035 and check for any related codes.
2
Inspect the left front wheel speed sensor wiring and connectors for damage or corrosion.
3
Measure the resistance across the wheel speed sensor terminals using a multimeter; compare with manufacturer specifications.
4
Inspect the tone ring for any signs of damage or debris that could affect sensor readings.
5
Check the brake fluid level and inspect for any leaks in the brake system that may affect sensor performance.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the vehicle battery to prevent electrical shorts.
Ensure the vehicle is on a flat surface and securely lifted using jack stands.

2. Remove the Left Front Wheel

Use a lug wrench to loosen the lug nuts while the vehicle is still on the ground.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts and take off the left front wheel.

3. Remove the Wheel Speed Sensor

Locate the left front wheel speed sensor, typically mounted on the steering knuckle.
Disconnect the sensor's electrical connector.
Remove the sensor mounting bolt using a socket wrench.
Gently pull the sensor out of its mounting location.

4. Inspect and Replace

Inspect the sensor for any signs of wear or damage.
If the sensor is faulty, install a new wheel speed sensor:
- Apply anti-seize compound to the sensor's O-ring if applicable.
- Insert the new sensor into the mounting hole and secure it with the bolt.
- Reconnect the electrical connector.

5. Reassemble and Test

Reinstall the left front wheel and hand-tighten the lug nuts.
Lower the vehicle and fully tighten the lug nuts to the manufacturer’s specified torque.
Reconnect the vehicle battery.
Start the vehicle and check for any error codes using the OBD-II scanner to ensure the C0035 code has cleared.