What does the "Anti-Skid Service Required" warning mean in a 2015 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

669 words

Problem Statement

Learn about the 'Anti-Skid Service Required' warning in a 2015 Volvo XC60, its symptoms, diagnostic steps, and repair instructions.

Affected Component

Anti-Skid System / Traction Control System

Estimated Time

2-4 hours

Symptoms

•The 'Anti-Skid Service Required' message appears on the dashboard.
•The traction control light may be illuminated.
•Potential loss of traction control functionality.
•Erratic behavior of the ABS (Anti-lock Braking System) or traction control.
•The vehicle may exhibit reduced stability on slippery surfaces.

Diagnostic Steps

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flashlight
•basic hand tools (screwdriver, wrench)
•OBD-II scanner
•Multimeter
•socket set
•Brake fluid tester

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Understanding the "Anti-Skid Service Required" Warning in a 2015 Volvo XC60

The "Anti-Skid Service Required" warning in a 2015 Volvo XC60 indicates a potential issue with the vehicle's anti-skid (or traction control) system, which is part of the Electronic Stability Control (ESC) system. This system helps to maintain stability during slippery conditions or sudden maneuvers by controlling wheel slip. If this warning is illuminated, it is essential to diagnose and address the issue to ensure safe driving conditions.

Step 1: Visual Inspection

Tools Required: Flashlight, basic hand tools (screwdriver, wrench).
Check for any visible damage to the wheels, tires, and suspension components.
Inspect the brake fluid level and ensure it is within the recommended range.
Look for any leaks around the brake lines or ABS module.

Step 2: Scan for Diagnostic Trouble Codes (DTCs)

Tools Required: OBD-II scanner.

Turn the ignition on (don't start the engine).
Connect the OBD-II scanner to the vehicle's diagnostic port.
Read the stored DTCs related to the ABS or traction control system.
Note any codes that appear, as they will guide further diagnostics.

Step 3: Check the Wheel Speed Sensors

Tools Required: Multimeter, socket set.

Locate the wheel speed sensors on each wheel hub.
Disconnect the electrical connectors from the sensors.
Using a multimeter, check the resistance of each sensor (should typically be around 1,000 to 2,000 ohms).
Inspect the wiring for any damage or corrosion.
If a sensor is faulty or has an incorrect resistance reading, it may need replacement.

Step 4: Inspect the ABS Module

Tools Required: Basic hand tools.

Locate the ABS module under the hood or near the brake master cylinder.
Check for any loose or corroded connections at the ABS module.
If DTCs indicate a failure in the ABS module, further testing may be required, which may involve specialized tools.

Step 5: Check Brake Fluid and System

Tools Required: Brake fluid tester, basic hand tools.

Check the brake fluid level in the reservoir.
Inspect the fluid for contamination (dark color, debris).
If the fluid is low or contaminated, bleed the brake system and replace the fluid.

Repair Instructions

Step 1: Replace Faulty Wheel Speed Sensors

Jack up the vehicle and securely support it on jack stands.
Remove the wheel corresponding to the faulty sensor.
Disconnect the sensor from its electrical connector and remove any mounting bolts.
Install the new sensor in the reverse order of removal.
Reconnect the electrical connector and reinstall the wheel.

Step 2: Repair or Replace ABS Module (if necessary)

If DTCs indicate a problem with the ABS module, consult a service manual for specific procedures.
Disconnect the battery before proceeding with the ABS module repair/replacement.
Remove the ABS module as specified in the service manual.
Install the new module and reconnect all wiring.
Reconnect the battery.

Step 3: Reset DTCs

Use the OBD-II scanner to clear the DTCs after repairs are completed.
Take the vehicle for a test drive to ensure the "Anti-Skid Service Required" warning does not reappear and that the traction control system operates correctly.

Conclusion

The "Anti-Skid Service Required" warning in a 2015 Volvo XC60 can be attributed to various issues, primarily related to the traction control system or ABS. Following the diagnostic and repair steps outlined above can help resolve the issue and restore the vehicle's safety systems. Always refer to the vehicle's service manual for specific details and torque specifications as needed. If you're unsure about any step, consider seeking professional assistance.