FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What should I check if my 2014 Volvo XC60 fails to start? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/What should I check if my 2014 Volvo XC60 fails to start?

What should I check if my 2014 Volvo XC60 fails to start?

Volvo XC60 First Generation (2008-2017)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
685 words

Problem Statement

Learn how to diagnose and fix starting issues with your 2014 Volvo XC60. Follow our step-by-step guide to identify symptoms, required tools, and diagnostic steps.

Affected Component
Starting System

Symptoms

  • •Ignition does not engage (no crank)
  • •Engine cranks slowly or not at all
  • •Clicking sound when turning the key
  • •Dashboard lights flicker or do not illuminate
  • •Fuel gauge shows empty or low fuel warning

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •OBD-II scanner
  • •Torque wrench
  • •Battery terminal cleaner
  • •Screwdriver set
  • •Jumper cables
  • •Socket set
  • •Ratchet
  • •Flashlight

Additional Information

Affected Component
Starting System
Difficulty
medium
Severity
medium
Tools Required
9 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem: 2014 Volvo XC60 Fails to Start
Tools Required:
  • Multimeter
  • OBD-II scanner
  • Torque wrench
  • Battery terminal cleaner
  • Screwdriver set
  • Jumper cables
  • Socket set
  • Ratchet
  • Flashlight

Step 1: Check for Battery Issues

  1. Visual Inspection:
    • Check the battery terminals for corrosion or loose connections. Clean terminals if necessary.
  2. Voltage Test:
    • Use a multimeter to check the battery voltage. A healthy battery should read between 12.4V - 12.6V.
    • If the voltage is below 12.4V, proceed to jump start the vehicle.
  3. Load Test:
    • If you have access to a battery load tester, perform a load test to confirm the battery's health. If it fails the load test, replace the battery.

Step 2: Inspect the Starter Motor and Relay

  1. Starter Relay Check:
    • Locate the starter relay in the fuse box (refer to the owner’s manual for exact location). Swap it with another relay of the same type to rule out relay failure.
  2. Starter Motor Test:
    • Use a multimeter to check for voltage at the starter motor terminal while someone turns the ignition key to the start position. You should see battery voltage (approximately 12V) at the terminal.
    • If there is no voltage, the issue may be with the ignition switch, wiring, or the neutral safety switch (for automatic transmissions).

Step 3: Check Fuses

  1. Fuse Box Inspection:
    • Check relevant fuses related to the ignition and starting system. Use the owner's manual to locate the correct fuse.
    • Replace any blown fuses.

Step 4: Examine the Fuel System

  1. Fuel Pump Operation:
    • Turn the ignition to the "ON" position (do not start) and listen for the fuel pump. You should hear a humming sound for a few seconds.
    • If you do not hear the fuel pump, check the fuel pump relay and wiring.
  2. Fuel Pressure Test:
    • If the pump operates, perform a fuel pressure test at the fuel rail to ensure proper pressure is being delivered. Consult the specifications for the required fuel pressure for your engine.

Step 5: Scan for Diagnostic Codes

  1. OBD-II Scanner:
    • Connect the OBD-II scanner to the vehicle’s diagnostic port.
    • Check for any trouble codes that may indicate issues with the starting system or sensors (e.g., crankshaft position sensor).
Repair Instructions:

Battery Replacement (If Required):

  1. Disconnect the negative terminal first, then the positive terminal.
  2. Remove the battery hold-down bracket.
  3. Carefully lift the battery out of the tray.
  4. Place the new battery in the tray and secure it with the hold-down bracket.
  5. Connect the positive terminal first, then the negative terminal. Ensure connections are tight.

Starter Motor Replacement (If Required):

  1. Disconnect the negative battery terminal.
  2. Remove any necessary components to access the starter (i.e., intake tubing, heat shields).
  3. Unplug the electrical connections from the starter.
  4. Remove the starter mounting bolts using a socket set.
  5. Remove the starter from the engine bay.
  6. Install the new starter by reversing the removal steps. Ensure all connections are secure.

Fuel Pump Replacement (If Required):

  1. Relieve fuel pressure from the system.
  2. Disconnect the negative battery terminal.
  3. Remove the rear seat or access panel to reach the fuel pump module.
  4. Disconnect electrical connectors and fuel lines from the pump assembly.
  5. Remove the pump assembly and replace with a new one.
  6. Reinstall and reconnect all components, ensuring no fuel leaks.
Conclusion:

After completing the necessary checks and repairs, attempt to start the vehicle again. If the vehicle still fails to start, further diagnostics may be required to investigate deeper issues such as a malfunctioning ignition switch or ECM problems. Always refer to the manufacturer’s service manual for specific torque specifications and detailed diagrams.