why does my Volvo XC60 First Generation (2008-2017) shake when I turn

Volvo XC60 First Generation (2008-2017)

Error Codes

3-5 hours

Time

medium

Difficulty

medium

Severity

3 min read

581 words

Problem Statement

Learn how to diagnose and fix shaking issues when turning in your Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported when working underneath.
•Disconnect the battery before working on electrical systems.

Symptoms

•Vibration or shaking felt through the steering wheel during turns
•Noise coming from the front end when turning
•Uneven tire wear
•Difficulty steering or a loose feeling in the steering wheel
•Pulling to one side while turning

Diagnostic Steps

1
Inspect tire condition and pressure for uneven wear or improper inflation.
2
Check for play in the steering components by wiggling the steering wheel with the vehicle stationary.
3
Examine suspension components such as control arms, bushings, and struts for wear or damage.
4
Check the wheel alignment to ensure it is within manufacturer specifications.
5
Investigate the CV joints for any signs of damage or excessive play.
6
Scan for any error codes related to the vehicle’s stability control or traction control systems.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack
•Jack stands
•Socket set
•Wrench set
•Pry bar
•CV joint removal tool
•Alignment machine

Parts Required

•Tie rods (if worn)
•Control arms or bushings (if damaged)
•CV joint assemblies (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and pressure for uneven wear or improper inflation.
2
Check for play in the steering components by wiggling the steering wheel with the vehicle stationary.
3
Examine suspension components such as control arms, bushings, and struts for wear or damage.
4
Check the wheel alignment to ensure it is within manufacturer specifications.
5
Investigate the CV joints for any signs of damage or excessive play.
6
Scan for any error codes related to the vehicle’s stability control or traction control systems.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is off.
Disconnect the battery if working on electrical components.

2. Tire Inspection

Sub-steps:
- Inspect each tire for uneven wear patterns.
- Measure tire pressure and inflate to the recommended levels.
Tools Required: Tire pressure gauge, visual inspection tools.

3. Steering Components Check

Sub-steps:
- Jack up the front of the vehicle and secure it on jack stands.
- Grasp the front wheels and check for play by moving them side to side and up and down.
- Replace any worn or damaged tie rods or steering rack components.
Tools Required: Jack, jack stands, socket set.

4. Suspension Components Inspection

Sub-steps:
- Visually inspect control arms, bushings, and struts for signs of wear or damage.
- Replace any damaged components, focusing on bushings and ball joints.
Tools Required: Wrench set, socket set, pry bar.

5. CV Joint Examination

Sub-steps:
- Inspect the CV joints for tears in the rubber boot or grease leakage.
- Replace any CV joint assemblies that are damaged or worn out.
Tools Required: CV joint removal tool, socket set.

6. Wheel Alignment Adjustment

Sub-steps:
- After any repairs, perform a wheel alignment using a professional alignment machine.
- Adjust caster, camber, and toe according to manufacturer specifications.
Tools Required: Alignment machine.