FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Volvo/XC60/Second Generation (2018-2024)/how to fix C1001 error code on my Volvo XC60 Second Generation (2018-2024)

how to fix C1001 error code on my Volvo XC60 Second Generation (2018-2024)

Volvo XC60 Second Generation (2018-2024)

Error Codes
Severity: highDifficulty: mediumError Code: C10012-4 hours
3 min read
565 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix C1001 error code in Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions for brake system issues.

Error Code
C1001
Affected Component
Brakes
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Ensure the vehicle is properly secured on jack stands if lifting is necessary.

Symptoms

  • •Check engine light illuminated
  • •ABS warning light on the dashboard
  • •Traction control light activated
  • •Unresponsive brakes or spongy brake pedal
  • •Inconsistent speedometer readings
  • •Vehicle stability issues during acceleration or cornering

Diagnostic Steps

  1. 1Scan the vehicle's onboard computer using an OBD-II scanner to confirm the C1001 error code and check for any related codes.
  2. 2Inspect the wheel speed sensors for damage, dirt, or loose connections.
  3. 3Check the brake control module for any visible damage or corrosion.
  4. 4Verify the wiring harness connected to the wheel speed sensors for continuity and shorts.
  5. 5Test the voltage and resistance of the wheel speed sensors using a multimeter.
  6. 6Clear the error code and take the vehicle for a test drive to see if the code reappears.

Solution

Solution

1. Preparation

  • Gather all necessary tools and parts.
  • Disconnect the vehicle's battery to ensure safety while working on electrical components.
  • Ensure the vehicle is on a flat surface and secure it with wheel chocks.

2. Inspect and Clean Wheel Speed Sensors

  • Locate the wheel speed sensors at each wheel hub.
  • Remove any dirt or debris around the sensors using a clean cloth.
  • Disconnect the wiring harness from each wheel speed sensor.
  • Inspect connectors for corrosion; clean with electrical contact cleaner if necessary.

3. Replace Faulty Wheel Speed Sensors (if needed)

  • If any wheel speed sensors are confirmed faulty:
    • Remove the retaining bolts using a socket set.
    • Carefully pull the sensor out from the hub assembly.
    • Install the new sensor in the reverse order, ensuring it is securely fastened.
    • Connect the wiring harness back to the new sensor.

4. Check and Repair Wiring Harness

  • Examine the wiring harness connected to wheel speed sensors for damage or wear.
  • Repair any damaged wires by splicing in new wiring or using electrical tape.
  • Ensure all connections are secure and insulated to prevent short circuits.

5. Reconnect Battery and Clear Codes

  • Reconnect the battery terminals securely.
  • Use the OBD-II scanner to clear the C1001 error code.
  • Ensure all connections are tight and there are no exposed wires.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Electrical contact cleaner
  • •Torque wrench

Parts Required

  • •Wheel speed sensors (if faulty)
  • •Electrical wiring (if repairs are necessary)

Additional Information

Error Code
C1001
Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
2 items

Related Faults

  1. why does my Volvo XC60 feel like it's losing traction on dry roads

    Discover how to diagnose and resolve traction loss issues in your Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Suspension5 symptoms

  2. how to tell if my Volvo XC60 has a bad wheel bearing

    Learn how to diagnose and fix a bad wheel bearing in your Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Suspension5 symptoms

  3. how to change the cabin air filter on my Volvo XC60 Second Generation (2018-2024)

    Learn how to change the cabin air filter in your Volvo XC60 (2018-2024) to improve air quality. Step-by-step guide with tools and tips.

    HVAC5 symptoms

  4. how to fix a check engine light on my Volvo XC60 Second Generation (2018-2024)

    Learn how to diagnose and fix the check engine light issue on your 2018-2024 Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    P0420Engine5 symptoms

  5. how do I know if my Volvo XC60 AC compressor clutch is bad

    Learn how to diagnose and fix AC compressor clutch issues in your Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    HVAC5 symptoms

  6. how to reset the maintenance light on my Volvo XC60 Second Generation (2018-2024)

    Learn how to reset the maintenance light on your 2018-2024 Volvo XC60 with this step-by-step guide. Keep your vehicle's maintenance up to date.

    Electrical3 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation