FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Volvo/XC60/Second Generation (2018-2024)/how to fix P0011 timing issue on my Volvo XC60 Second Generation (2018-2024)

how to fix P0011 timing issue on my Volvo XC60 Second Generation (2018-2024)

Volvo XC60 Second Generation (2018-2024)

Error Codes
Severity: highDifficulty: mediumError Code: P00112-4 hours
3 min read
521 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0011 camshaft timing issue in Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0011
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect battery before working on electrical systems.
  • ⚠Allow engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or engine stalling
  • •Reduced engine performance or power
  • •Poor fuel economy
  • •Increased emissions

Diagnostic Steps

  1. 1Use an OBD-II scanner to confirm the P0011 error code and check for related codes.
  2. 2Inspect the engine oil level and condition; ensure it is at the correct level and not contaminated.
  3. 3Verify the VVT actuator operation by checking for proper movement during engine operation.
  4. 4Check the timing belt or chain for any signs of wear or misalignment.
  5. 5Inspect the VVT solenoid and wiring for damage or electrical issues.
  6. 6Examine the oil passages for blockages that could affect VVT operation.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is turned off.
  • Disconnect the battery to prevent electrical shorts.

2. Inspect and Replace Engine Oil

  • Sub-steps:
    1. Remove the engine oil drain plug using a socket set and drain the oil into a pan.
    2. Replace the oil filter using an oil filter wrench.
    3. Reinstall the drain plug and torque to manufacturer specifications (typically around 25-30 Nm).
    4. Refill the engine with the appropriate type and amount of engine oil (consult the owner's manual for specifications).

3. Check and Replace VVT Solenoid

  • Sub-steps:
    1. Locate the VVT solenoid (typically near the camshaft cover).
    2. Disconnect the electrical connector from the solenoid.
    3. Remove mounting bolts and take out the solenoid.
    4. Install the new VVT solenoid and torque bolts to manufacturer's specifications.
    5. Reconnect the electrical connector.

4. Adjust Camshaft Timing

  • Sub-steps:
    1. Remove any components obstructing access to the timing belt or chain (e.g., engine covers).
    2. Align the timing marks on the camshaft and crankshaft as per the service manual.
    3. If necessary, adjust the timing by repositioning the camshaft or replacing timing components.
    4. Reassemble all components in the reverse order of disassembly.

5. Reconnect Battery

  • Reconnect the negative battery terminal and ensure it is secure.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Oil filter wrench
  • •Torque wrench

Parts Required

  • •Engine oil (as per specifications)
  • •Oil filter
  • •VVT solenoid (if necessary)

Additional Information

Error Code
P0011
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
3 items

Related Faults

  1. how can I tell if my Volvo XC60 has a bad wheel bearing

    Learn how to diagnose and fix a bad wheel bearing in your Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Suspension6 symptoms
  2. my Volvo XC60 doors freeze shut in winter what can I do

    Learn how to fix frozen doors on your Volvo XC60 during winter. Step-by-step guide to diagnose and prevent door freezing issues.

    Body/Interior5 symptoms
  3. how to fix the fuel gauge in my Volvo XC60 Second Generation (2018-2024)

    Learn how to diagnose and fix the fuel gauge issue in your 2018-2024 Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Fuel System5 symptoms
  4. why is my Volvo XC60 hard to turn at low speeds

    Learn how to diagnose and fix steering issues in your Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Steering5 symptoms
  5. my Volvo XC60 doesn't start and just clicks what could be the problem

    Learn how to diagnose and fix starting issues in your Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Electrical5 symptoms
  6. why is my Volvo XC60 experiencing decreased acceleration

    Learn how to diagnose and fix decreased acceleration issues in Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation