how to reset the maintenance light on my Volvo XC60 Second Generation (2018-2024)

Volvo XC60 Second Generation (2018-2024)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

408 words

Problem Statement

Learn how to reset the maintenance light on your Volvo XC60 (2018-2024) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before attempting to reset the maintenance light.

Symptoms

•Maintenance light illuminated on the dashboard
•Warning message displayed on the information screen
•No other performance issues present

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is in the 'OFF' position.
2
Insert the key or press the start button without pressing the brake pedal to turn on the electrical system.
3
Check that all doors are closed to ensure proper system operation.
4
Access the vehicle's settings using the infotainment system or instrument cluster.
5
Navigate to the maintenance or service menu on the display.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is in the 'OFF' position.
2
Insert the key or press the start button without pressing the brake pedal to turn on the electrical system.
3
Check that all doors are closed to ensure proper system operation.
4
Access the vehicle's settings using the infotainment system or instrument cluster.
5
Navigate to the maintenance or service menu on the display.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface with the ignition in the "ON" position (engine off).
Have the vehicle manual on hand for reference.

Use the right side control stalk or the steering wheel buttons to navigate to the "My Car" or "Settings" menu on the dashboard display.
Select "Service" or "Maintenance" from the options presented.

3. Resetting the Maintenance Light

Once in the maintenance menu, look for "Reset Service" or "Reset Maintenance Light."
Confirm the selection when prompted by pressing the appropriate button (usually "OK" or "Yes").
The system may ask for confirmation; select "Yes" to proceed with the reset.

4. Finalizing the Reset

Turn off the ignition completely.
Wait a few seconds, then turn the ignition back on to verify that the maintenance light is no longer illuminated.