FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Volvo/XC60/536 (2017-Present)/how to fix P0302 misfire code on Volvo XC60 536 (2017-Present)

how to fix P0302 misfire code on Volvo XC60 536 (2017-Present)

Volvo XC60 536 (2017-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P03022-4 hours
3 min read
577 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0302
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical components.
  • ⚠Allow the engine to cool before performing any repairs.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or uneven engine performance
  • •Loss of power during acceleration
  • •Decreased fuel efficiency
  • •Possible engine vibration
  • •Increased emissions

Diagnostic Steps

  1. 1Scan the vehicle's computer using an OBD-II scanner to confirm the presence of the P0302 code and check for any additional codes.
  2. 2Inspect the spark plug in cylinder 2 for wear or damage and verify its gap is within specifications.
  3. 3Check the ignition coil in cylinder 2 for functionality by swapping it with another cylinder's coil and retesting.
  4. 4Perform a compression test on cylinder 2 to confirm that it is within the manufacturer’s specifications.
  5. 5Inspect fuel injector operation in cylinder 2 using a noid light or a multimeter.
  6. 6Examine the wiring and connectors associated with the ignition system and fuel injector for damage or corrosion.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts. Ensure the engine is cool.
  • Disconnect the negative battery terminal to prevent electrical shorts.

2. Replace Spark Plug

  • Tools Required: Socket set, torque wrench, spark plug gap tool.
  • Remove the ignition coil from cylinder 2.
  • Unscrew and remove the spark plug using a socket wrench.
  • Inspect the old spark plug for wear. If necessary, replace it with a new one, ensuring the gap is set to factory specifications (usually around 0.028-0.031 inches).
  • Reinstall the spark plug and torque it to the manufacturer's specifications (typically around 15-20 lb-ft).

3. Replace Ignition Coil

  • Tools Required: Socket set.
  • If the ignition coil is faulty, remove it from cylinder 2.
  • Install a new ignition coil ensuring it is seated properly.
  • Reconnect the electrical connector to the coil.

4. Inspect and Clean Fuel Injector

  • Tools Required: Fuel injector cleaning kit (if needed), socket set.
  • Remove the fuel injector from cylinder 2.
  • Inspect the injector for clogs or leaks.
  • Clean the fuel injector using a cleaning kit or replace it if cleaning doesn’t resolve issues.
  • Reinstall the fuel injector and reconnect any necessary electrical connectors.

5. Reassemble and Test

  • Reconnect all components removed during the repair.
  • Reconnect the negative battery terminal.
  • Start the engine and allow it to reach operating temperature.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Spark plug gap tool
  • •Fuel injector cleaning kit (if needed)

Parts Required

  • •Spark plug (for cylinder 2)
  • •Ignition coil (for cylinder 2)
  • •Fuel injector (if needed)

Additional Information

Error Code
P0302
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

  1. how to fix the exhaust leak on my Volvo XC60 536 (2017-Present)?

    Learn how to diagnose and fix an exhaust leak in your Volvo XC60 536 (2017-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Exhaust System5 symptoms

  2. why does my Volvo XC60 536 (2017-Present) check engine light keep coming on

    Learn how to diagnose and fix the check engine light issue in your Volvo XC60 (2017-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  3. how to diagnose camshaft problems in my Volvo XC60 536 (2017-Present)?

    Learn how to diagnose camshaft problems in your Volvo XC60 536 (2017-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  4. how to fix the turbo on my Volvo XC60 536 (2017-Present)

    Step-by-step guide to diagnose and fix turbocharger issues in Volvo XC60 536 (2017-present). Includes symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  5. my Volvo XC60 536 (2017-Present) has poor acceleration, what could be wrong

    Learn how to diagnose and fix poor acceleration issues in Volvo XC60 536 (2017-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  6. how to fix my Volvo XC60 536 (2017-Present) headlight that keeps going out

    Learn how to diagnose and fix headlight issues in your 2017-Present Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Electrical5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation