FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the cruise control not working on my Volvo XC60 536 (2017-Present) - Volvo XC60
Home/Cars/Volvo/XC60/536 (2017-Present)/how to fix the cruise control not working on my Volvo XC60 536 (2017-Present)

how to fix the cruise control not working on my Volvo XC60 536 (2017-Present)

Volvo XC60 536 (2017-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
598 words

Problem Statement

Learn how to diagnose and fix cruise control issues in your Volvo XC60 (2017-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Ensure the vehicle is on a flat surface and secured with wheel chocks before performing repairs.

Symptoms

  • •Cruise control indicator light not illuminating
  • •Inability to set or adjust cruise control speed
  • •Cruise control disengaging unexpectedly
  • •Faulty acceleration while cruise control is engaged
  • •Check engine light or related warning lights illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Screwdriver set

Parts Required

  • •Brake pedal switch (if faulty)
  • •Cruise control stalk/button (if defective)
  • •Vehicle speed sensor (if malfunctioning)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the vehicle battery to ensure safety before starting repairs.
  • Tools Required: OBD-II scanner, socket set, multimeter, screwdriver set.
2. Inspect and Test Brake Pedal Switch
  1. Locate the brake pedal switch under the dashboard.
  2. Use a multimeter to test the switch's continuity by pressing and releasing the brake pedal.
  3. If the switch is faulty, disconnect the wiring harness and remove the switch using the socket set.
  4. Install a new brake pedal switch if necessary, reconnect the wiring, and ensure it is adjusted correctly.
3. Check Cruise Control Stalk/Button
  1. Remove the steering wheel cover using the screwdriver set to access the cruise control stalk.
  2. Inspect the stalk for any visible damage or wear.
  3. If the stalk is defective, remove the screws securing it and replace it with a new unit.
  4. Reassemble the steering wheel cover.
4. Test Vehicle Speed Sensor
  1. Locate the vehicle speed sensor (usually near the transmission).
  2. Disconnect the wiring harness and use a multimeter to check the sensor's output while the vehicle is in motion.
  3. Replace the sensor if it is not providing the correct voltage or readings.
5. Inspect Fuses and Wiring
  1. Locate the fuse box and check for any blown fuses related to the cruise control system.
  2. Replace any blown fuses with the specified amperage fuses.
  3. Visually inspect all wiring and connectors in the cruise control circuit for signs of wear, corrosion, or damage.
  4. Repair or replace any damaged wiring as necessary.