why does my Volvo XC60 536 (2017-Present) make a clicking sound when I turn the wheel

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a level surface and the engine is off.
• Disconnect the battery to avoid any electrical issues.

2. Inspect and Replace CV Joints

• Tools Required: Jack stands, socket set, torque wrench, CV joint removal tool.
• Sub-steps:
  1. Lift the front of the vehicle using a jack and secure it with jack stands.
  2. Remove the front wheels to gain access to the CV joints.
  3. Inspect the CV boots for tears or leaks; if damaged, replace the CV joint.
  4. Remove the axle nut using the appropriate socket.
  5. Use a CV joint removal tool to extract the CV joint from the transmission.
  6. Install the new CV joint, ensuring proper alignment.
  7. Reinstall the axle nut and torque it to the manufacturer’s specifications (typically around 150 Nm).
  8. Reattach the wheels and lower the vehicle.

3. Inspect Steering Components

• Tools Required: Socket set, torque wrench.
• Sub-steps:
  1. Inspect the tie rod ends and ball joints for play or damage.
  2. If necessary, replace any worn tie rod ends or ball joints.
  3. Reassemble components and torque to specifications as per manufacturer guidelines.

4. Check Power Steering System

• Tools Required: Power steering fluid, funnel.
• Sub-steps:
  1. Check the power steering fluid level and top it off if low.
  2. Inspect hoses for leaks or cracks; replace any damaged hoses.
  3. Bleed the power steering system to remove any air bubbles.