why is there a clunking noise when I turn my Volvo XC60 536 (2017-Present)

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a flat surface and engage the parking brake.
• Disconnect the battery if working on electrical components.

2. Inspect and Replace Suspension Components

• Tools Required: Socket set, torque wrench, jack stands, pry bar.
• Lift the vehicle and secure it with jack stands.
• Visually inspect control arms and bushings for cracks or excessive wear.
• If damage is found, remove the affected components:
  • Remove the bolts securing the control arms using a socket set.
  • Use a pry bar to detach the control arm from the chassis.
• Install new control arms and bushings:
  • Position the new control arm and secure it with bolts.
  • Torque bolts to manufacturer specifications.

3. Inspect and Replace CV Joints

• Tools Required: Socket set, CV joint puller, grease.
• Remove the wheel and brake assembly to access the CV joints.
• Inspect the CV boots for tears; if damaged, replace the CV joint.
• To replace the CV joint:
  • Remove the axle nut using a socket set.
  • Use a CV joint puller to detach the joint from the hub.
  • Install the new CV joint, ensuring proper alignment.
  • Reassemble the wheel and brake assembly.

4. Inspect Wheel Bearings

• Tools Required: Torque wrench, socket set.
• Spin the wheel by hand to check for noise or roughness.
• If necessary, remove the wheel bearings:
  • Dismantle the hub assembly and extract the bearings.
  • Install new bearings and reassemble the hub, torquing bolts to specifications.