how to reset the service light on my Volvo XC90 First Generation (2002-2014)

Volvo XC90 First Generation (2002-2014)

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

408 words

Problem Statement

Learn how to reset the service light on your 2002-2014 Volvo XC90. Step-by-step guide to clear service reminders and ensure accurate notifications.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual) and on level ground while performing this reset.

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition but do not start the engine.
3
Turn the key to the 'II' position (the position just before the engine starts).
4
Press and hold the 'Trip' button on the instrument cluster until the display shows 'Reset' or the service light blinks.
5
Release the 'Trip' button and then press it again to confirm the reset.
6
Turn the ignition off and then start the vehicle to verify that the service light is turned off.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition but do not start the engine.
3
Turn the key to the 'II' position (the position just before the engine starts).
4
Press and hold the 'Trip' button on the instrument cluster until the display shows 'Reset' or the service light blinks.
5
Release the 'Trip' button and then press it again to confirm the reset.
6
Turn the ignition off and then start the vehicle to verify that the service light is turned off.

Solution

1. Preparation

2. Resetting the Service Light

Ignition Positioning
- Insert the key into the ignition.
- Turn the key to the "II" position without starting the engine.
Activate Trip Button
- Locate the “Trip” button on the instrument cluster.
- Press and hold the “Trip” button until the display indicates "Reset" or the service light begins to blink.
Confirm Reset
- Release the “Trip” button.
- Press it once more to confirm the reset action.
Turn Off Ignition
- Turn the key back to the "Off" position.
- Remove the key from the ignition.
Verify Reset
- Start the vehicle to check that the service light is no longer illuminated.