FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the service light on my Volvo XC90 First Generation (2002-2014) - Volvo XC90
Home/Cars/Volvo/XC90/First Generation (2002-2014)/how to reset the service light on my Volvo XC90 First Generation (2002-2014)

how to reset the service light on my Volvo XC90 First Generation (2002-2014)

Volvo XC90 First Generation (2002-2014)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
411 words

Problem Statement

Learn how to reset the service light on your 2002-2014 Volvo XC90. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' if it has an automatic transmission before performing this reset procedure.

Symptoms

  • •Service light illuminated on the dashboard
  • •Possible previous maintenance or service completed
  • •Vehicle may require routine maintenance (oil change, filter replacement, etc.)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Key fob or ignition key

Parts Required

  • •None required for resetting the service light

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools:
    • Key fob or ignition key
  • Ensure the vehicle is parked on a flat surface and in the "OFF" position.
2. Resetting the Service Light

  1. Turn Ignition On

    • Insert the key into the ignition and turn to the "II" position (do not start the engine).

  2. Press and Hold Trip Button

    • Locate the "Trip" button on the instrument cluster (usually near the odometer).
    • Press and hold the "Trip" button.

  3. Cycle Ignition

    • While holding the "Trip" button, turn the key to "0" (OFF) then back to "II" (ON).

  4. Monitor Service Light

    • Continue to hold the "Trip" button until the service light begins to blink and then turns off.

  5. Complete the Reset

    • Release the "Trip" button and turn the ignition back to "OFF."