FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volvo XC90 shakes when I brake what could be the issue - Volvo XC90
Home/Cars/Volvo/XC90/First Generation (2002-2014)/my Volvo XC90 shakes when I brake what could be the issue

my Volvo XC90 shakes when I brake what could be the issue

Volvo XC90 First Generation (2002-2014)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
505 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking during braking in Volvo XC90. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool before working on the brakes.

Symptoms

  • •Steering wheel shakes during braking
  • •Pulsation felt in the brake pedal
  • •Uneven wear on brake pads or rotors
  • •Increased braking distance
  • •Grinding noise when brakes are applied

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Torque wrench
  • •Dial indicator
  • •Brake cleaner
  • •Jack stands

Parts Required

  • •Brake pads
  • •Brake rotors (if warped)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: socket set, torque wrench, dial indicator, brake cleaner, and jack stands.
  • Ensure the vehicle is parked on a flat surface and the engine is off.
  • Disconnect the battery for safety.
2. Remove Wheels
  • Loosen wheel lug nuts with a socket wrench.
  • Raise the vehicle with a jack and secure it with jack stands.
  • Remove the wheels to access the brake components.
3. Inspect and Measure Brake Rotors
  • Use a dial indicator to measure rotor runout.
    • If warping is present (more than 0.002 inches), replacement is necessary.
  • Clean the rotors with brake cleaner to remove dust and debris.
4. Replace Brake Pads and Rotors (if necessary)
  • Remove the caliper bolts and slide the caliper off the rotor.
  • Replace the old brake pads with new ones, ensuring they are properly seated.
  • If rotors are warped, remove them by unscrewing the rotor retaining screws (if equipped) and sliding off.
  • Install new rotors, tightening screws to manufacturer specifications.
5. Reassemble and Torque
  • Reinstall the brake caliper and torque the caliper bolts to the manufacturer specifications.
  • Reinstall the wheels and hand-tighten the lug nuts.
  • Lower the vehicle and torque the lug nuts to the specified value in a crisscross pattern.
6. Final Inspection
  • Reconnect the battery.
  • Check fluid levels and ensure the brake fluid is at the proper level.
  • Test the brake system by gently applying the brakes while stationary.