how do I reset the oil light on my Volvo XC90 Second Generation (2015-2024)?

Volvo XC90 Second Generation (2015-2024)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

307 words

Problem Statement

Learn how to reset the oil light on your 2015-2024 Volvo XC90 after an oil change. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing the reset.

Symptoms

•Oil light illuminated on the dashboard
•Oil change performed recently
•Service message displayed on the infotainment screen

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Insert the key into the ignition but do not start the engine.
3
Press the gas pedal three times quickly within five seconds.
4
Turn the ignition key to the 'On' position without starting the engine.
5
Observe the dashboard for the oil light and service message reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Insert the key into the ignition but do not start the engine.
3
Press the gas pedal three times quickly within five seconds.
4
Turn the ignition key to the 'On' position without starting the engine.
5
Observe the dashboard for the oil light and service message reset.

Solution

1. Preparation

Ensure the vehicle is off and parked safely.
Have the owner's manual handy for reference.

2. Ignition Position

Insert the key into the ignition.
Turn the ignition to the "On" position (do not start the engine).

3. Gas Pedal Action

Quickly press the gas pedal three times fully down within five seconds.

4. Confirmation

Check the dashboard for the oil light and service message.
If the oil light is no longer illuminated, the reset is complete.