how to replace the windshield wipers on my Volvo XC90

Volvo XC90 Second Generation (2015-2024)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

3 min read

438 words

Problem Statement

Step-by-step guide on how to replace windshield wipers on a Volvo XC90. Learn symptoms, diagnostic steps, and tools required for a successful repair.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the wiper arms are supported when raised to avoid snapping back and causing injury.

Symptoms

•Streaking or smearing on the windshield
•Wipers not making full contact with the glass
•Wiper blades are cracked or torn
•Wipers skipping or chattering across the windshield
•Noisy operation when wipers are in use

Diagnostic Steps

1
Inspect the wiper blades for signs of wear, such as cracks or tears.
2
Test the wiper operation to ensure they are functioning at all speeds.
3
Check the wiper arm for any bends or damage that may prevent proper contact with the windshield.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Clean cloth

Parts Required

•New wiper blades (specific to Volvo XC90)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required:
- Flathead screwdriver (if necessary)
- Clean cloth
Park the vehicle on a level surface and turn off the ignition.
Raise the wiper arms so they are in a vertical position.

2. Remove Old Wiper Blades

Locate the release tab on the wiper blade where it attaches to the wiper arm.
Press the release tab while sliding the wiper blade off the arm.
If necessary, use a flathead screwdriver to gently pry the blade off.
Repeat the process for the other wiper blade.

3. Install New Wiper Blades

Take the new wiper blade and align it with the wiper arm.
Slide the blade onto the arm until you hear a click, indicating it is securely attached.
Ensure that the blade is straight and properly aligned.
Repeat the process for the second wiper blade.

4. Final Adjustment

Lower the wiper arms back onto the windshield carefully to avoid damage.
Check the wipers to ensure they move freely and make proper contact with the glass.