how to reset the maintenance light on my Volvo XC90 Second Generation (2015-2024)

Volvo XC90 Second Generation (2015-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

345 words

Problem Statement

Learn how to reset the maintenance light on your Volvo XC90 (2015-2024) with this simple step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and secure during this procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Service reminder notification displayed
•No engine performance issues or other warning lights present

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Locate the 'OK' button on the steering wheel.
3
Press and hold the 'OK' button until the maintenance light starts to flash.
4
Release the 'OK' button once the light is flashing.
5
Confirm the reset by pressing the 'OK' button again when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for resetting the maintenance light

Parts Required

•No parts required for this procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Locate the 'OK' button on the steering wheel.
3
Press and hold the 'OK' button until the maintenance light starts to flash.
4
Release the 'OK' button once the light is flashing.
5
Confirm the reset by pressing the 'OK' button again when prompted.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Ensure the vehicle is in "Park" (for automatic transmissions) or neutral (for manual).

2. Ignition Position

Insert the key fob into the ignition slot.
Turn the ignition switch to the "ON" position without starting the engine. The dashboard lights will illuminate.

3. Reset the Maintenance Light

Press and hold the "OK" button on the steering wheel.
Keep holding the "OK" button until the maintenance light begins to flash (about 5-10 seconds).
Release the "OK" button once the light starts to flash.
Press the "OK" button again to confirm the reset when prompted.

4. Verify the Reset

Turn the ignition off and then back on to check if the maintenance light is extinguished.