how to reset the maintenance light on my Volvo XC90 Second Generation (2015-2024)

Volvo XC90 Second Generation (2015-2024)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

324 words

Problem Statement

Learn how to reset the maintenance light on your 2015-2024 Volvo XC90. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and the ignition is in the 'ON' position to avoid any unintended movement.

Symptoms

•Maintenance light is illuminated on the dashboard
•Notification message indicating service is due
•No other warning lights present
•Engine performance is normal

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Navigate to the 'Settings' menu on the vehicle's infotainment system.
3
Select 'My Car' and then go to 'Service' or 'Maintenance'.
4
Look for the 'Reset Service' option and select it.
5
Confirm the reset when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob to access the vehicle

Parts Required

•No parts required for this procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked in a safe location.
Have the vehicle's key fob available.

2. Access Settings

Turn the ignition to the "ON" position (do not start the engine).
Wait for the dashboard lights to illuminate.

Use the infotainment system controls to access the "Settings" menu.
Select "My Car".

4. Reset Maintenance Light

In the "My Car" menu, find and select "Service" or "Maintenance".
Choose the "Reset Service" option.
Confirm the reset when prompted by pressing "OK".

5. Verify Reset

Turn the ignition off and then back on to check if the maintenance light is extinguished.