FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Volvo XC90 Second Generation (2015-2024)? - Volvo XC90
Home/Cars/Volvo/XC90/Second Generation (2015-2024)/how to reset the maintenance light on my Volvo XC90 Second Generation (2015-2024)?

how to reset the maintenance light on my Volvo XC90 Second Generation (2015-2024)?

Volvo XC90 Second Generation (2015-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
336 words

Problem Statement

Learn how to reset the maintenance light on your 2015-2024 Volvo XC90 with this simple step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a secure and stationary position before performing the reset.

Symptoms

  • •Maintenance light illuminated on the instrument cluster
  • •Possible reminder for oil change or service interval
  • •No performance issues affecting the vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather required tools: None needed for this process.
  • Ensure the vehicle is parked in a safe location with the engine off.
2. Accessing the Maintenance Reset Function
  • Sit in the driver's seat and close all doors.
  • Insert the key fob into the ignition or ensure the vehicle is in the ON position.
3. Resetting the Maintenance Light
  1. Press and hold the "Odometer" button (often found on the instrument cluster) while turning the ignition to the ON position (do not start the engine).
  2. Keep holding the button until the maintenance light begins to blink, then turns off. This may take about 10 seconds.
  3. Release the "Odometer" button once the maintenance light is off.