how to reset the oil change light on my Volvo XC90 Second Generation (2015-2024)

Volvo XC90 Second Generation (2015-2024)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

421 words

Problem Statement

Learn how to reset the oil change light on your Volvo XC90 (2015-2024) with this step-by-step guide. Ensure your maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is in 'Park' or securely set in gear before performing any maintenance tasks.

Symptoms

•Oil change light on the dashboard is illuminated
•Maintenance reminder message displayed on the vehicle's information screen
•Vehicle performance may not be affected, but the alert can be distracting

Diagnostic Steps

1
Ensure the vehicle is in the 'Run' position without starting the engine.
2
Access the vehicle's menu using the steering wheel controls.
3
Navigate to the 'Settings' or 'Car Status' section on the dashboard display.
4
Locate the 'Maintenance' or 'Oil Change Reminder' option in the menu.
5
Confirm the reset procedure by following the on-screen prompts.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key fob

Parts Required

•No parts are required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Run' position without starting the engine.
2
Access the vehicle's menu using the steering wheel controls.
3
Navigate to the 'Settings' or 'Car Status' section on the dashboard display.
4
Locate the 'Maintenance' or 'Oil Change Reminder' option in the menu.
5
Confirm the reset procedure by following the on-screen prompts.

Solution

1. Preparation

Gather the necessary tools: vehicle key fob and owner’s manual for reference.
Ensure the vehicle is parked on a flat surface with the engine off.

2. Access the Ignition

Insert the key fob into the ignition slot or press the start button without pressing the brake pedal.
Ensure the dashboard lights illuminate, indicating the vehicle is in the "Run" position.

Use the steering wheel controls to scroll through the vehicle settings.
Find the "Settings" or "Car Status" option on the display screen.

4. Reset the Oil Change Light

Select the "Maintenance" or "Oil Change Reminder" option.
Follow the instructions on the screen to reset the oil change light.
Confirm the reset when prompted.

Press the "Back" button or use the steering wheel controls to exit the settings menu.
Turn off the ignition and then start the engine to ensure that the oil change light is no longer illuminated.